Welcome, Guest
Username: Password: Remember me

TOPIC: Wide band ELF/VLF/LF through to MF/HF/VHF/UHF receiver

Wide band ELF/VLF/LF through to MF/HF/VHF/UHF receiver 19 Sep 2013 00:10 #1

  • shaun
  • shaun's Avatar
Looking for a Russian manufactured or similar make, wide band Receiver covering ELF through to UHF or separate receivers for the ELF/VLF/LF/MF and separate for HF/VHF/UHF receivers.

It seems there are so many US and UK makes but I can't find any east bloc manufacturers even though I believe they have many extremely good equipment. Some reference found for GDR make EKD but little else.

So you guys can surely guide me around.
The administrator has disabled public write access.

Wide band ELF/VLF/LF through to MF/HF/VHF/UHF receiver 19 Sep 2013 06:03 #2

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
Hi Shoun,
Our a SunSDR2 transceiver can work in frequency range 0-80, 80-160 MHz in receive mode also in ELF/VLF/LF/MF. For working in UHF/SHF bands transceiver's needed a transverter.
In Transmit mode it can work in all amateur bands 160M-6M(max.Pout=15-20W) and 2M(max.Pout=10W).
If user wants to transmit in other amateur bands, where Power Amplifier is not working, user can use additional wideband DAC OUTput with +10dBm(10mW) output power. This output works in frequency range 0-160MHz and can be used in all ELF/VLF/LF/MF bands. Transceiver has 10MHz reference input, and his frequency can be stabilized by more stable external generator like Rubidium standart or GPS receiver's.
At the present time all bands which not 160-6M, 2M are closed in TX mode in the own software ExpertSDR2. But if users need to work in others bands we can add it to band list transceiver.
The software ExpertSDR2 has very high resolution spectrum scope(max. 2.5Hz), waterfall, has two independent receivers, and every receiver can transmit, every receiver has own CAT-interface, VAC-interface, and can be connected to any additional HAM software. In the ExpertSDR2 software is used Kenwood CAT-command protocol (TS-480 or simple Kenwood All).

If you have any question, please, ask us.
Василий, Vasily,
Expert Electronics
Last Edit: 19 Sep 2013 06:05 by VassiL.
The administrator has disabled public write access.
Time to create page: 0.068 seconds