I am using jtdx-improved via the built in TCI interface: sourceforge.net/projects/jtdx-improved/files/jtdx_2.2.159/
No major issues so far.
73, Joe OE3KJO

Thanks Paul for your photo with the configuration, it took me a little while to find the configuration, everything was solved by reversing the lines of the Virtual audio cable. I am attaching photos of my setup. I use the Vac Control panel program for the Virtual audio cable lines


EA1AHA
Juan Carlos

Hi Juan

Glad you got it working, what was the issue before you reversed the virtual audio cables ?
I see you are using different VB cable software from me and wonder how clean your TX signal appears on the screen when transmitting Digital mode?


Thanks
Paul

Hello Paul, I'm attaching two photos so you can see how the TX works for me in FT8 and in USB mode, you can tell me how you see it, since I don't understand much about that topic. Thank you

EA1AHA
Juan Carlos

Hi Juan

Thanks for the screen shots, your tx also looks dirty for want of a better description.
If you look at my attached screen shot of TX using FT8 with SunSDR 2 you may better understand what I am getting at.
It's as though the audio from the Digi mode software is either being distorted or over driven. I see the same with both WSJTX and MixW

Thanks
Paul