Welcome, Guest
Username: Password: Remember me

TOPIC: ptt error on wsjtx

ptt error on wsjtx 28 Dec 2017 20:37 #1

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
seasons greetings to all i have set up wsjtx its receiving and decoding fine it is transmitting and power is going out tone sounds a little dull
but my main concern is at the end of the tx i get messege in a box saying hamlib error protocol error whilesetting ptt off
ive no idea what this means if anybody can help it would be much appreciated
happy new year toall
many thanks steve
The administrator has disabled public write access.

ptt error on wsjtx 28 Dec 2017 21:42 #2

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
It sounds like you are trying to control PTT via CAT. Is that right or, if not, by what method are you interfacing PTT from ESDR2 to WSJTx?
The administrator has disabled public write access.

ptt error on wsjtx 29 Dec 2017 01:33 #3

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
yes your correct erik when I tried dtr my cat and tx stopped working all together
thanks steve
The administrator has disabled public write access.

ptt error on wsjtx 29 Dec 2017 07:06 #4

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
If you haven't done so, follow the set up procedure in the User Manual Addendum. Trying to set PTT on/off via CAT is problematic because WSJTx sends a command that Hamlib cannot process due to the Kenwood protocol being incompatible. It is much better to use the method described with separate ports for CAT and PTT. I note you say that via DTR you had an error but if correctly set up it works perfectly. If you get stuck you can always ask for a Team Viewer session.
The administrator has disabled public write access.

ptt error on wsjtx 29 Dec 2017 11:24 #5

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
Hi Erik
Thanks for your reply when I first got the radio I set everything up as per the instructions which you very kindly produced, but I had no luck in getting anything to work vasily very kindly did a team viewer session and got n1mm logger working I cannow do ssb cw rtty and psk. The settings he has done do not match the ones on mb1 anendum but it works well. If I set a new profile and change settings to yours for wsjtx would it not interfere with expert settings I don't want to screw up what is already working
Thanks steve
The administrator has disabled public write access.

ptt error on wsjtx 29 Dec 2017 12:39 #6

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
That is a good question, but really it should only be a matter of amending the WSJTx settings in the UAM to match those Vasily set for you. The principle will be the same which is to avoid PTT via CAT and use the dedicated virtual port method. It may have a different port number to allow it to also work with your N1MM. I can do TV if you need it.
The administrator has disabled public write access.

ptt error on wsjtx 30 Dec 2017 01:35 #7

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
thanks very much for the reply erik i will take another look later today if i have a problem i will take you up on your kind offer to do a team veiwer call

many thanks steve
The administrator has disabled public write access.

ptt error on wsjtx 01 Jan 2018 17:43 #8

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
hi erk i have no luck and seemed to have messed fldigi up as well. my n1mm logger is still ok and can tx rtty psk and cw. i would like TV session at a time suitable for you .
many thanks steve my e mail adress qrz.com
The administrator has disabled public write access.

ptt error on wsjtx 02 Jan 2018 07:16 #9

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
Ok Steve, I will email you today.

Erik
The administrator has disabled public write access.

ptt error on wsjtx 03 Jan 2018 15:25 #10

  • G1ppa
  • G1ppa's Avatar
  • OFFLINE
  • Posts: 14
My issues with wsjtx and fldigi now sorted many thanks to Erik for his time today
The administrator has disabled public write access.
Time to create page: 0.096 seconds