Welcome, Guest
Username: Password: Remember me

TOPIC: EESDR V3 0.12.1 Alpha with N1MM+

EESDR V3 0.12.1 Alpha with N1MM+ 16 Mar 2022 10:38 #1

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
Hi all,
Sorry asking for something already explained earlier (but which haven't found).
I'm using SunSDR2 DX with EESDR V3.0.12.1 Alpha and want to use N1MM. It is not clear how I should use TCI. On the TCI page I can download the ExpertSync application. I can interface SunSDR with N1MM by using ExpertSync, but transmitting (hit F1-key for CQ) does hang the SunSDR.
What do I do wrong here? So what I want is to use N1MM with EESDR3.

Regards, Gerben - PG5M
Last Edit: 16 Mar 2022 10:56 by Gerben.
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 16 Mar 2022 15:49 #2

  • SM0JCA
  • SM0JCA's Avatar
  • OFFLINE
  • Posts: 63
  • Thank you received: 11
Use the new RadioSync 1.0.0 software.
Download from Software=> Software with TCI support
73 de Erik SM0JCA
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 16 Mar 2022 17:47 #3

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
Hi Erik,
I have done so but still the same result, no CW transmit. CAT for frequency and band/mode change OK.
Regards, Gerben - PG5M
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 16 Mar 2022 18:03 #4

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
Do you still nee VSP to pair the COM ports?
I have now COM 5 and 6 paired with VSP Mgr. In RadioSync I have under TCI: localhost:50001 and under CAT (TS480) COM5 8N1, baud rate 19200 and PTT: DTR and CW: RTS.
In N1MM I have configured Radio: TS480, COM6, 8N1, 19200, PTT: DTR and CW: RTS.
Regards, Gerben - PG5M
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 31 Jul 2022 17:32 #5

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
i have the same problem.

n1mm+eedsdr 012.1 alpha+radysync

working in ssb, but IMPOSSIBLE to have cw IN tx. i try with 1 or 2separate cat , always the same, start tx and then sudsdr if off
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 31 Jul 2022 18:29 #6

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
Hi,
You need to set Break-in on 250 or 300 msec as far as I know. Give it a try.
Gerben
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 01 Aug 2022 05:42 #7

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
Tried, seams better,but still switching off the sun and not trasmitting anything in cw.
If i swtich in ssb work fine. If switch to other log, is fine too . The problem is just with n1mm
The administrator has disabled public write access.

EESDR V3 0.12.1 Alpha with N1MM+ 01 Aug 2022 11:11 #8

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
I use RadioSync to combine COM10 and 11 to sync the transceiver and COM 12 and 13 for CW and PTT. In N1MM I use COM 13 for CW/PTT. In the settings for COM13 I set PTT Delay to 100 msec. This will do the job. Thanks to SM0JCA for the tip he gave some time ago which solved my problem.
The administrator has disabled public write access.
The following user(s) said Thank You: SM0JCA

EESDR V3 0.12.1 Alpha with N1MM+ 01 Aug 2022 16:55 #9

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
MACIG , is working
thanks a lot
The administrator has disabled public write access.
Time to create page: 0.078 seconds