Welcome, Guest
Username: Password: Remember me

TOPIC: eesdr V3 0.12.1 alfa tci with Log4om

eesdr V3 0.12.1 alfa tci with Log4om 16 Mar 2022 11:29 #1

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
Hallo. I Have problem to use Log4om with TCI. The sunsdr dx 2 disconnect sometimes often and somtimes several hours between disconnects. When I disabled TCI and running Log4om without TCI it seems to be no problem other than spots missing and no frequensy control . So my question Is it anyone else who is running Log4om to TCI and eesdr V3 0.12.1 I use laptop. Fairly powerful and wifi 6 and router new and also wifi 6 In V3 0.12.0 I had no problem and that was also with my old router. Tranceiver is direkt to laptop It seems to be som issue with the TCI in V3 0.12.1
73 de sm6usu Svante
sm6usu
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 16 Mar 2022 15:16 #2

  • ELKING
  • ELKING's Avatar
Happy user with EESDR V2 -> LogHx and Log4OM :D
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 16 Mar 2022 22:46 #3

  • gi4fue
  • gi4fue's Avatar
  • OFFLINE
  • Posts: 31
  • Thank you received: 4
No Issues here, V3 0.12.1 alpha, Log4om, JTDX 158 all running smoothly for over 48hrs now

PC is Intel NUC 8I7HNK, 32GB memory, Radio and PC on a gigabit switch at the end of a 30m fibre link from house to shack .. all patch cables CAT7 shielded

Charlie GI4FUE
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 17 Mar 2022 07:51 #4

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
Thank you.. I reinstalled v3 0.12,1 yesterday aftenoon and also installed the tci radiosync . I have so far running the tranceiver about 5 hours without problem. I am not sure about that radiosync If I need it? My english is not good enough to understand all tecnical things here. :sorry:
Thank you for answer.
sm6usu Svante
sm6usu
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 17 Mar 2022 17:41 #5

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
Ok tranceiver disconnect a couple of times today :twisted: So now I bought a cable and netcard. So far 1 hour working without problem :roll:
73 de sm6usu Svante
sm6usu
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 20 Mar 2022 12:34 #6

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
No disconnect in 24 hours :D Using WiFi and Log 4om last 8 hours. What I did? In windows controlpanel I take away V3 0.12.1 Then a new installation of V3 0.12.1 for the third time
After that I lower my powersupply from 14,0 volt to 12.8 volt . First running about 12 hours with no connection to wifi or netcable just the tranceiver no Log4om. This night or early morning 03.00 I start the wifi connection no problem and a couple of hours later I start Log4om I have also rise my voltage to 13,5 and I am happy with that. All is still working Also Stop and start all to see if it starts ok and it did.So far no problem . Maybe it is a limiter on the voltage? I dont know, but earlier I think the limit was 14.5 volt. Anyway I am really happy after several days struggle.
73 de sm6usu Svante
sm6usu
The administrator has disabled public write access.
The following user(s) said Thank You: Rome

eesdr V3 0.12.1 alfa tci with Log4om 22 Mar 2022 16:11 #7

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
Disconnect again Now testing whithout TCI and Log4OM Just try to track where the problem is.
73 de sm6usu Svante
sm6usu
The administrator has disabled public write access.

eesdr V3 0.12.1 alfa tci with Log4om 22 Mar 2022 16:23 #8

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 6
Hmmmm Disconnect after 5 minits again whithout TCI and Log4OM. So that was not the problem.
73 de sm6usu Svante
sm6usu
The administrator has disabled public write access.
Time to create page: 0.078 seconds