Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Key Clicks

Key Clicks 17 Nov 2021 15:59 #1

  • Walt W0CP
  • Walt W0CP's Avatar
  • OFFLINE
  • Posts: 9
  • Thank you received: 1
Greetings Forum.....I was on twenty meter CW recently in a long QSO. I received two independent reports of key clicks spaced out and extending 25 KHz. I upped the ramp from 7 to 8ms and was informed that the clicks went away. I am primarily CW and this is the first report I have received about clicks since switching from the 2Pro to the 2DX a month ago. 7ms ought to be adequate. Question: is there a setting or condition other than ramp that could cause this?
The photo was sent to me by one of the hams. 73
W0CP-20m_211114.jpg
The administrator has disabled public write access.

Key Clicks 18 Nov 2021 00:17 #2

  • danielwee
  • danielwee's Avatar
  • OFFLINE
  • Posts: 209
  • Thank you received: 29
FWIW, I was monitoring my own CW transmissions last night (7ms ramp) and did not see click-splatter. I was listening to my remote station from my local station not too far away.
The administrator has disabled public write access.

Key Clicks 18 Nov 2021 02:46 #3

  • Walt W0CP
  • Walt W0CP's Avatar
  • OFFLINE
  • Posts: 9
  • Thank you received: 1
Yes, I have not had a problem at 7ms either until now. Trying to figure out what's going on. Could be just a software anomaly that was cured when I switched to 8ms. I'll go back to 7ms and check it out. Was hoping to do that with the transmit analyzer, but that's not working on CW in vers 11. So, I'll recruit a buddy.
The administrator has disabled public write access.
Time to create page: 0.082 seconds