Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Switching RX1 to RX2

Switching RX1 to RX2 13 Dec 2021 14:01 #1

Is it possible to switch from one receiver to the other with the ecoder or do you need two ecoder's using one for each receiver
The administrator has disabled public write access.

Switching RX1 to RX2 13 Dec 2021 14:43 #2

  • SM0JCA
  • SM0JCA's Avatar
  • NOW ONLINE
  • Posts: 64
  • Thank you received: 11
Yes, it is possible.
In the E-coder panel you can assign a button to switch between RX1 and RX2.

In E-coder panel click on a button, find VFO menu and enable "Switch receiver".

By pressing the button you will switch between RX1 and RX2

In addition to this you can logically switch each VFO A /VFO B in SDC TCI setup by enabeliing "Logical control E-coder VFO A/B"

Erik SM0JCA
The administrator has disabled public write access.
The following user(s) said Thank You: G4POP - Terry

Switching RX1 to RX2 13 Dec 2021 16:47 #3

Thank you thats exactly what I needed to know

73 gd DX Terry
The administrator has disabled public write access.
Time to create page: 0.088 seconds