Welcome, Guest
Username: Password: Remember me

TOPIC: SunSDR2 PRO at JW0W

SunSDR2 PRO at JW0W 30 Jul 2021 06:31 #1

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
All
I am just home after a DX Expedition trip to Prins Karls Forland where I was participating in the JW0W team. I decide to bring my SunSDR2 PRO and it was configured like this: PC running ExperSDR2 Version 1.3.1 update 8 > SDC > N1MM+ I was also using the E-coder. A last minute configuration to get "Focu Helper".... mouse cursor back in the log entry field if you have used the mouse to change a settings in Expert SDR software. The setup worked almost 100%. To have "Focus Helper" when using a E-coder is not really critical however, it is nice to have. I used the function under E-coder tab / tick of box "VFO B" ... nice to move only the VFO B slice when you running a pileup. When using this function together with SDC it very often turned it self OFF. This is a bit cumbersome when you are in the middle of a pileup. After a couple of days with this issue, I closed SDC software and I never could see this problem anymore. I wonder if this is a bug in ExpertSDR software or SDC. Anyone else that have seen this issue. Thanks to Erik, G0CGL for last minute guidance before I left home. See attached screen grab ecoder
ecoder.jpg



73
Rune LA7THA
The administrator has disabled public write access.

SunSDR2 PRO at JW0W 30 Jul 2021 07:41 #2

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1054
  • Thank you received: 528
Hi, Rune.
Please contact Yuri Pavlov about it, it's clearly a question for him.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: la7tha

SunSDR2 PRO at JW0W 30 Jul 2021 09:27 #3

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
Hello

ok, will copy and paste into an e-mail....thanks
The administrator has disabled public write access.

SunSDR2 PRO at JW0W 30 Jul 2021 10:06 #4

  • UT4LW
  • UT4LW's Avatar
  • OFFLINE
  • Posts: 84
  • Thank you received: 26
The SDC has two functions that control E-Coder:

1. SDC->TCI->TCI Client -> "Logical control ECoder VFOA/B" (Watching the Split mode)
2. SDC->OTRSP-> "Auto control E-Coder".

Turn them off if they are turned on.
Юрий.
The administrator has disabled public write access.
The following user(s) said Thank You: Rome
Time to create page: 0.105 seconds