Welcome, Guest
Username: Password: Remember me

TOPIC: ExpertSDR3 0.11.0 Build 30122021 No audio on mic2

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 14:25 #1

When running SDR3 I have no audio drive to radio on mic 2 it shows audio in settings but none of the audio settings do anything Boost, Eq, etc. PC mic works fine, but not mic 2, the mic is a PR781 and works great on SDR2. Any help would be great as I would like to start using SDR3.

Thanks
Tom-KC4CBQ
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 14:35 #2

  • danielwee
  • danielwee's Avatar
  • OFFLINE
  • Posts: 209
  • Thank you received: 29
Have you selected Mic2 as the active mic?

Screenshot2022-02-13223452.png
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 14:47 #3

Yes I have.
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 15:24 #4

If I go to audio setting I can see audio on the boost graph and on the eq graph, but no drive to radio unless I turn mic gain up high and then it sounds bad, none of the adjustments in the audio settings do anything. All settings work fine on PC mic.
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 16:33 #5

  • danielwee
  • danielwee's Avatar
  • OFFLINE
  • Posts: 209
  • Thank you received: 29
Hmmm... I'll give this a test next time I am at the remote site where the radio is. I previously used Mic2 with a Yaesu mic and EESDR2 without problems. Do you have problems with EESDR2?
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 16:50 #6

  • W3FRG
  • W3FRG's Avatar
  • OFFLINE
  • Posts: 42
  • Thank you received: 8
Where are your settings on the EQ?

One or more adjustments may contribute to your low audio availability.
I use an Audio Technica AT1300 on Mic 2.
See attached pic for settings as an example.

Tom W3FRG
Attachments:
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 13 Feb 2022 18:34 #7

No problems with EESDR2 works great.
Thanks
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 14 Feb 2022 12:15 #8

I found my problem, I did not know there was a profile setting in the setting tab it was hidden to the right of the screen and had to drag it over to see it. I was using the one next to the tune.

Thanks everyone for the help
The administrator has disabled public write access.

ExpertSDR3 0.11.0 Build 30122021 No audio on mic2 14 Feb 2022 13:44 #9

  • W3FRG
  • W3FRG's Avatar
  • OFFLINE
  • Posts: 42
  • Thank you received: 8
Glad you found your audio gain issue.
If the "Application Scale " was at anything greater than 130% the Mike Profile settings would be hidden.
I typically keep the Scale at 120% so I don't have to strain to see the settings.

GL Tom W3FRG
The administrator has disabled public write access.
Time to create page: 0.123 seconds