Hello everyone.
This morning when I turned on the transceiver, and set to DIGU mode to operate in FT8 I get this weird MODE.
Has anyone had the same problem?.

how guys how you have the offset mode on DIGU Modulator?
how you can you see is set to 1600hzI haven't touched anything,i this the right offset for DIGU
attach an image.

I have seen the same anomaly where the filter is symmetrical around the set frequency instead of offset to the sideband. This is not consistent - sometimes it comes up correctly.
The filter can be changed to the correct configuration by just grabbing the far edge(s) of the filter and dragging it to the desired width, but this should not be required.
I have also noticed that using JTDX via TCI, it seems that JTDX always resets the mode to SSB, and trying to manually set it to DIGU via the UI does not work - it just stays (or returns to) SSB.
Anyone else notice this?
Tom N0BS

Set offset to zero or just tune further from the offset to put yourself in the window.

I set mine at 0 and at 14.070 the 3kHz window is right there where it belongs.

Dear Celso, what parameters did you set to view the callsign on the Sunsdr2_dx screen? I use JTDX I think. Thanks and good DX de Arturo, HB9MIR

Hi Artuto I used Macloggerdx login program via TCI,Macloggerdx Cluester is the one who passes the data to the SunSDR3.

Hi Ton thanks for the replay.
i have to set back the offset DIGU Modulator to 0.
and now work perfect.