Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: HARD RESET NOT OK

HARD RESET NOT OK 30 Jun 2020 20:18 #1

  • marcoon7lm
  • marcoon7lm's Avatar
Hello everyone and 73'qro to ham
2 very strange problems with the "hummingbird".
1) displayed signal level at 59 on all frequencies (even with short-circuited or on a load of 50)
2) I tried a deep reset to return to the factory but it did not react as expected. no green yellow flashing then permanent green stabilization. RST + BT + PWR ... the LED continues to flash green and never stabilizes. However, there is communication with the soft car ... when starting the software installs the firmware makes a reset. then when I restart the software a message appears to indicate that the calibrations of its not fair and that they must be entered by default. I answer yes, the procedure seems to go to the end. however, nothing changes. how to get out of this carousel. Is there a way to make this factory reset work?
A VERY VERY BIG THANK YOU for your help.
73's QRO to all ON7LM brussels
The administrator has disabled public write access.

HARD RESET NOT OK 20 Nov 2020 19:33 #2

I have the same situation at the moment. But only one time i had a normal working receiver, connecten directly to the laptop. But now i only get the green blinking led with no response..

Try to hold the reset and/or BT button for a longer time.

73's

Robert
The administrator has disabled public write access.
Time to create page: 0.066 seconds