Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Reversing Firmware on DDC

Reversing Firmware on DDC 14 Dec 2020 17:19 #1

  • KP4AKB
  • KP4AKB's Avatar
  • OFFLINE
  • Posts: 44
  • Thank you received: 3
Since the latest firmware update, my s-meter and spectrum base-band are higher than normal. I have the latest 9.3 firmware, but I would like to go back to the previous one so my s-meter works correctly

Ed Rios
Columbus, OH
The administrator has disabled public write access.

Reversing Firmware on DDC 14 Dec 2020 21:59 #2

I had problems with the latest firmware with my Colibri. Ik downloaded the update 5 (or 6) and clicked op firmware update to install version 8.3.. Now my receiver is perfect!

Good luck.
The administrator has disabled public write access.

Reversing Firmware on DDC 15 Dec 2020 22:21 #3

  • KP4AKB
  • KP4AKB's Avatar
  • OFFLINE
  • Posts: 44
  • Thank you received: 3
I followed your suggestion and installed Version: 1.3.1 Update 6

After installed I was able to go back to firmware 8.3

My s-meter still reads S-5 with no antenna.

Thanks
KP4AKB/W8
Ed Rios
The administrator has disabled public write access.

Reversing Firmware on DDC 17 Dec 2020 17:47 #4

  • KP4AKB
  • KP4AKB's Avatar
  • OFFLINE
  • Posts: 44
  • Thank you received: 3
went back one more time to firmware 7.3 and my s-meter reads correctly.

Why would the firmware mess up my s-meter calibration???

Ed Rios
The administrator has disabled public write access.

Reversing Firmware on DDC 02 Jan 2021 23:58 #5

I just installed the latest software (and firmware), but the audio is distorted and the S meter is going wild.. So back to update 5 wich is the onlly stable softwareversion for me.
The administrator has disabled public write access.
Time to create page: 0.085 seconds