Welcome, Guest
Username: Password: Remember me

TOPIC: SUNSDR 2 DX , antenna A2 dose not work

SUNSDR 2 DX , antenna A2 dose not work 07 May 2022 15:07 #1

  • SM2UHF
  • SM2UHF's Avatar
  • OFFLINE
  • Posts: 11
  • Thank you received: 1
I got an SUNSDR 2 DX who the A2 input have no RX but TX is ok, the A3 have full RX and TX, is it one of the relays ?

73
Lars
SM2UHF
The administrator has disabled public write access.

SUNSDR 2 DX , antenna A2 dose not work 07 May 2022 15:55 #2

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 624
  • Thank you received: 294
SM2UHF wrote:
I got an SUNSDR 2 DX who the A2 input have no RX but TX is ok, the A3 have full RX and TX, is it one of the relays ?

73
Lars
SM2UHF

Doubt its a relay

More likely in the ANT configuration you have set to use something other in the same port for RX or you have accidently adjusted the gain to a very negative value

Which software are you using v2 or V3 IF V3 double check the B.M. configuration and the RX gain settings in B.M. as well

V3bandmager.jpg



also double check to make sure its the same Receiver as well and you haven't accidently turned on Split
73 Rick
Last Edit: 07 May 2022 16:01 by N8SDR.
The administrator has disabled public write access.

SUNSDR 2 DX , antenna A2 dose not work 07 May 2022 16:38 #3

  • SM2UHF
  • SM2UHF's Avatar
  • OFFLINE
  • Posts: 11
  • Thank you received: 1
Hi
I use V2, have not get V3 to work on my computer yet.

73
Lars
The administrator has disabled public write access.
Time to create page: 0.077 seconds