Welcome, Guest
Username: Password: Remember me

TOPIC: Ehternet 1 or 2 ports

Ehternet 1 or 2 ports 05 Sep 2022 15:57 #1

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 1
Hallo all. I am going to buy a stationar computer instead of my Laptop. When it comes to ethernet port I maybe want to be cable connected instead of wifi. But sunsdr2 dx also want a connection with Ethernet. Do I have to have a motherboard with 2 ethernet connection? How are your setup with stationar computers ?
Regards Svante sm6usu
sm6usu
The administrator has disabled public write access.

Ehternet 1 or 2 ports 06 Sep 2022 03:22 #2

  • VK6NX
  • VK6NX's Avatar
  • OFFLINE
  • Posts: 205
  • Thank you received: 163
Svante wrote:
How are your setup with stationar computers ?

Same way as you set up any laptop with simultaneous direct cable to SunSDR and wifi (for you internet). In absolute majority of the potential scenarios you just need to follow couple of directions:
1. Direct cable ethernet port is recommended (in most scenarious):
- to be on separate IP range (you may use either EE default from 192.168.16.0/24, or any other from RFC1918 range)
- leave Default GW and DNS fields blanc
- set port priority to highest (or at least above Internet ethernet port)
3. On Internet ethernet port (or WiFi):
- separate IP range (i.e. 192.168.1.0/24 or any other from RFC1918 range) with default GW and DNS
- set port priority lower than direct cable ethernet

Typical mac dual LAN setup:
ScreenShot2022-09-06at13.15.18.jpg


ScreenShot2022-09-06at13.20.51.jpg
The administrator has disabled public write access.

Ehternet 1 or 2 ports 06 Sep 2022 06:51 #3

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 1
Thank you very much for your informaion.
Best regards Svante sm6usu
sm6usu
The administrator has disabled public write access.
Time to create page: 0.103 seconds