Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Steppir SDA 100

Steppir SDA 100 27 Dec 2017 09:49 #1

Hello,
How can the SDA 100 steppir controller be connected with the SDR MB1 so that the autotrack function is opération
thank you for your reply
cordially
F4DNK Ingenieur Radar military S/390 IBM
The administrator has disabled public write access.

Steppir SDA 100 27 Dec 2017 10:13 #2

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 390
  • Thank you received: 206
You need the transceiver interface and interface cable part number 02118. The connection to the MB1 is via any of the methods described in the User Manual Addendum, depending on what, if any, other CAT enabled device you have in addition to the SDA.

A summary of those options:
1 Connection to the com port on the MB1 with CAT directed to it via either VSPE, SDC PA Tab or direct from the ESDR2 CAT Tab if you do not need to split com data (if not using a log book program for example)
2 A USB com port adapter from the MB1 with CAT data to it via one of the above methods
3 A MicroHam unit such as the MKII which has a dedicated CAT output for SteppIR
The administrator has disabled public write access.
The following user(s) said Thank You: efficace

Steppir SDA 100 13 Jan 2018 17:29 #3

Câbling Steppir 02118
DB9 Stappir SDA 100 ---- MB1 ( PC-side COM 1)
steppir.jpg


Configure Steppir SDA100 in set Ring Kenwood
F4DNK Ingenieur Radar military S/390 IBM
Last Edit: 13 Jan 2018 17:38 by efficace.
The administrator has disabled public write access.

Steppir SDA 100 13 Jan 2018 18:01 #4

  • G3XLG
  • G3XLG's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 13
Hello Efficace
Is this a standard Null Modem cable?
Where did you find the wiring diagram for the 02118 cable?
Do you connect it from the COM1 on the MB1 to the DATA IN or the DATA Out SR232 port on the S100 Controller?
Ray G3XLG
The administrator has disabled public write access.

Steppir SDA 100 14 Jan 2018 13:05 #5

Hello
Yes I use this cable that I made (steppir S02118)
it is connected to the( COM 1) of the mb1 to the ( COM IN ) of the sda 100.
it takes a virtel port for the MB1 and configure the sda100 in Kenwood and it is good !
it is not a standard null modem cable it must be manufactured or purchased (ref steppir s02118 or s18)

73
F4DNK Ingenieur Radar military S/390 IBM
Last Edit: 14 Jan 2018 13:12 by efficace.
The administrator has disabled public write access.

Steppir SDA 100 21 Jan 2018 14:22 #6

efficace wrote:
Câbling Steppir 02118
DB9 Stappir SDA 100 ---- MB1 ( PC-side COM 1)

steppirMB1.jpg



Configure Steppir SDA100 in set Ring Kenwood
F4DNK Ingenieur Radar military S/390 IBM
Last Edit: 21 Jan 2018 14:26 by efficace.
The administrator has disabled public write access.
Time to create page: 0.072 seconds