Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: SunSDR QRP no network & no ethernet

SunSDR QRP no network & no ethernet 18 Feb 2018 17:14 #1

:?:
I have a problem with SunSDR QRP. After a firmware update
the blue LED blinks constantly. I did a reset. Subsequently, the network connection is interrupted and can no longer be produced. With network cable, the LED lights up constantly. Without a network cable, the LED will flash continuously. I can not use the transceiver anymore. What can I do or can someone help me?
Sigi, This email address is being protected from spambots. You need JavaScript enabled to view it.
The administrator has disabled public write access.

SunSDR QRP no network & no ethernet 19 Feb 2018 09:06 #2

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
Hi, you've launched the firmware update mode, but you didn't complete it.
The transceiver in the boot mode, blue LED means it requires new firmware.
1) Connect the transceiver to your PC via LAN
2) PC's network card should be in the transceivers subnet, 192.168.16.10 (10 as an example)
3) Launch the ESDR2 for SunSDR2 QRP, check that in the settings set the default IP address - 192.168.16.225 and port 50001.
4) Now press the Start button in ESDR2, it should update the firmware of the transceiver.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: G3XLG

SunSDR QRP no network & no ethernet 23 Feb 2018 08:25 #3

Thank you
it's all OK
The administrator has disabled public write access.
Time to create page: 0.064 seconds