Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: A Problem with the power indicator

A Problem with the power indicator 25 Feb 2018 13:06 #1

A problem with the power indicator.
On my SunSDR2 QRP, the power indicator does not work anymore. Gestures the RC5 installed. The power indicator did not work after turning off the night in the morning. Is this a defect in the hardware or a bug in the software? It worked until yesterday. When the device was completely redelivered by the dealer, it also had this error. I did a reset and fixed the IP. Thereafter, the power indicator functioned.
What can I do?
Sigi, This email address is being protected from spambots. You need JavaScript enabled to view it.
The administrator has disabled public write access.

A Problem with the power indicator 27 Feb 2018 23:02 #2

  • R7MU
  • R7MU's Avatar
  • OFFLINE
  • R7MU
  • Posts: 1
Sigi, if you talk about HF Power indicator on the right of the screen,
please do Tunes-Device-Expert and if all Power Correction =1, push WRITE to save values. All will be OK.
If you talk about current indicator, bottom of the screen, I do not know. Waiting for customer service.
Sergey, R7MU
This email address is being protected from spambots. You need JavaScript enabled to view it.
The administrator has disabled public write access.

A Problem with the power indicator 28 Feb 2018 18:40 #3

:yes:
All good,
WRITE to save values. Program can be operated normally again.
I have a new graphics card in the PC.
I think, now it works. With the onboard graphics card, this is not possible.
Thank you
The administrator has disabled public write access.
Time to create page: 0.067 seconds