Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****
  • Page:
  • 1
  • 2

TOPIC: ATU Firmware process

ATU Firmware process 29 Apr 2022 11:56 #16

  • W4SSB
  • W4SSB's Avatar
  • OFFLINE
  • Posts: 14
  • Thank you received: 4
My new cable has less than 1 ohm resistance.

Manuel W4SSB
The administrator has disabled public write access.
The following user(s) said Thank You: hari

ATU Firmware process 30 Apr 2022 19:05 #17

  • hari
  • hari's Avatar
  • OFFLINE
  • Posts: 26
  • Thank you received: 8
thanks for the information. I'm now using a 1m cat7 cable (0,3 ohms with plugs) instead of the original one (about 5 ohms). Now everything works perfectly.
vy 73 OE6HKE
The administrator has disabled public write access.

ATU Firmware process 02 Nov 2022 17:26 #18

Hi every one, I have just received my new AAT-100 today and it seems that my cable has a high resistance (almost 5 ohms), so I have all the issues described.
What are the references or type of the connector ? So I can buy a new one and use a cat7 cable to make a new cable.
Thank you for your help
Lionel HB9HMY
The administrator has disabled public write access.

ATU Firmware process 02 Nov 2022 17:29 #19

Hi,

I'm running all the issues described so far... I have checked the resistance of the cable and it's about 5 Ohms.

To build a new one with a cat7 cable, which kind of connector (type or standard) should I order and use.
Best regards

Lionel HB9HMY
The administrator has disabled public write access.

ATU Firmware process 03 Nov 2022 06:06 #20

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1091
  • Thank you received: 534
Hi Lionel.
Please contact us via email - This email address is being protected from spambots. You need JavaScript enabled to view it.
We'll send you a replacement cable.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.086 seconds