Welcome, Guest
Username: Password: Remember me


SOFDTWARE PROBLEM - MAYBE 01 May 2022 12:40 #1

I am running Logger 32 (latest) along with SDC/TDI (latest) and EESDR 3 v 0.12.1. In the main - all is good. However, I run JTDX via UDP from Logger32. I tell it to start JTDX which it does. All FT4/8 QSOs are automatically sent to Loggter also LOTW and Clublog - all this works well without problem. On starting up the radio software I select band and mode EG 10m FT8. However, when JTDX opens, the band automatically switched to USB. If I click on the mode button and reset to FT8, it almost instantaneously returns to USB. Likewise if |I select FT4 - it auto switches to USB. Within the JTDX programme for example if I am on FT8 and tell it to switch to FT4, the radio will QSY to the correct FT4 frequency, but will still be on USB. I also have Radiosync 64 which I am not using for Digi modes. How do I get the radio to mode FT8 or 4 when using digi modes? I dont know but is it a problem within SDC/TCI?
The administrator has disabled public write access.

SOFDTWARE PROBLEM - MAYBE 01 May 2022 14:47 #2

  • danielwee
  • danielwee's Avatar
  • Posts: 209
  • Thank you received: 29
Use DIGIU. The FT8 mode is not fully functional as yet. In the JTDX settings under RADIO select Data/Pkt.
Last Edit: 01 May 2022 14:48 by danielwee.
The administrator has disabled public write access.
The following user(s) said Thank You: GM4FDM
Time to create page: 0.060 seconds