Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Software

Software 11 Nov 2016 17:22 #1

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
In this topic I offer to discus the software for remote control.
Василий, Vasily,
Expert Electronics
Last Edit: 20 Nov 2016 20:02 by VassiL.
The administrator has disabled public write access.

Software 14 Nov 2016 14:21 #2

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
Last week was finished a beta version of Remote Control for ColibriDDC and SunSDR2/2Pro(in RX mode) and this software the same for these devices. The MB1 transceiver will supported soon.
Below you can find the link on the Instruction document for remote control under OS Windows.

Note: In the end of the document you can find the link on the software.
yadi.sk/i/BQACQY5brP6DR - Instructions ENG

The Rasberry Pi3 image you download by the folowing link:
yadi.sk/d/PGUiaw1OyQ6Km - Image RPi3
You can put Image for RPi3 by the Win32DiskImager.

RPi3 board can be used instead of Server PC.

The server's side should have static IP internet address. If you use RPi3 board, can be used web-version of the Client.
Tomorrow we will publish Windows server software for web-client.

As this is beta version, some DSP functions is not available now.
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.

Software 14 Nov 2016 16:38 #3

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
HI ,

Thanks for remote info in english

73
Rune LA7THA
The administrator has disabled public write access.

Software 20 Nov 2016 18:20 #4

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
A few day ago was finished server-software ExpertRS for the MB1 transceiver. This version only for MB1!
The server software works like the server software for SunSDR2/ColibriDDC, See instruction above. You should start ExpertRS server software inside MB1, close normal ExpertSDR2 inside MB1 and you can use your MB1 in RX mode remotely.
The link for downloading ExpertRS: drive.google.com/file/d/0B7rXYwp8MsxfR2czM2tLaW5nQjg
The client software the same as for SunSDR2/ColibriDDC and can be downloaded from the link in the Instruction document above.

In this beta version remote control can be used only HF A1 antennas for HF, and VHF A1 antennas for VHF. Can be used -20dB/0dB Preamp. All other hardware control can not be used now, but in the next beta versions will be added to remote control.
Василий, Vasily,
Expert Electronics
Last Edit: 20 Nov 2016 20:01 by VassiL.
The administrator has disabled public write access.

Software 20 Nov 2016 19:36 #5

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
If you want to use browser version of the remote access and want to open your remote device via internet browser, you should to do the folowing instructions:
1. Download the portable version of Apache HTTP-server from the folowing link: https://yadi.sk/d/QE6Hgc5kybeev

2. Unpack it to any folder on your PC.

3. In the unpacked folder find and start the file - start.bat.

4. Open browser and type the address to address line: http://localhost:8080/

5. If you open this page from other PC or other device, you should type IP address of the computer with started SDR-server software.
For example: http://192.168.16.154:8080/
Василий, Vasily,
Expert Electronics
Last Edit: 20 Nov 2016 19:37 by VassiL.
The administrator has disabled public write access.

Software 23 Nov 2016 20:17 #6

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
Hi VassiL

Thanks for "WEB SDR" this is a very nice feature. Let your programers continue the good work :-)

I will test more in the weekend and then i will test 600 km remote :-)

73 Rune LA7THA
The administrator has disabled public write access.

Software 28 Nov 2016 13:00 #7

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
SunSDR using remote client software and Web remote.

This weekend I have test remote using the client software and also using the Web Remote.
This has been tested on two different PC`s and Samsung PAD and Samsung S6 mobile phone.
In general the remote is working very well on all devises and I didn’t have to-do any reset or similar on any of the devises. I was running remote over internet (600Km) on a 10mb line and all was good. On both Android devises I used 4G network and it was working equally well.

Next on the wish list 

1. Antenna 1 and 2 selectors.
2. Would be nice to get the CAT to run on the server software. In my case I use CAT to talk to many other devises like antenna switch etc.
3. Option for 10dB PRE AMP
4. NR and APF.
5. Split
6. TX

What is SUNSDR programmer’s plan going forward?

73 Rune LA7THA
The administrator has disabled public write access.
The following user(s) said Thank You: VassiL

Software 05 Dec 2016 07:34 #8

  • pa5fn
  • pa5fn's Avatar
  • OFFLINE
  • Posts: 61
  • Thank you received: 9
Hi, tested remote and work good, also the web interface works fb on android phone
thanks for these nice features
The administrator has disabled public write access.
The following user(s) said Thank You: VassiL

Software 06 Dec 2016 06:04 #9

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
la7tha wrote:
SunSDR using remote client software and Web remote.
....
Next on the wish list 
1. Antenna 1 and 2 selectors.
2. Would be nice to get the CAT to run on the server software. In my case I use CAT to talk to many other devises like antenna switch etc.
3. Option for 10dB PRE AMP
4. NR and APF.
5. Split
6. TX
What is SUNSDR programmer’s plan going forward?
Hi Rune,
Thank you for the tests and the usefull wishes.
As you know, this is a test beta version of the remote control software, but now it works on 70% of all possibilities in RX mode.
1. Will be done in next version of Remote control.
2. Interesting wish, will think about it.
3. In next version will be supported all Preamp levels -20,-10,0,+10.
4. Will be supported NB, ANF, APF, not sure about NR, but will ask a programmers.
5,6. Split/TX/SubRX will be supported in next generation of Remote control afted finishing all main functions. I think, we will start working on TX mode in January 2017. Now, we should finish all RX functions.
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.

ColibriDDC RPI3 remote server - pse informations 10 Dec 2016 16:00 #10

Hello,

from guessing the content in a thread in russian language I saw there is some documentation and software (RPI3 OpenWRT image) for a remote server. Is there any info in English about it ? Whre is the download file of RPI3 image , I can't find it in normal download section of ColibriDDC.

Do I still need a PC with special software so access the remote server, or could it be done completely with a web browser, from any device, also Android ?

/////////////////////////

Hello,

sunsdr sells a RPI Remote Server

sunsdr.eu/product/rpi-server/

Is the RasPi software used there available ? Where can I find details ?

////////////////////////////


Hello,

sorry I don't understand russian language...

Is the information about using RPI3 as a remote server for ColibriDDC also available in english ?
Or is it all just in 'beta' state, I don't see anywhere in download or docu sections references to the docu files or RPi images mentioned here ?

vy73
Thomas
DK3DUA
Last Edit: 12 Dec 2016 06:50 by VassiL.
The administrator has disabled public write access.

ColibriDDC RPI3 remote server - pse informations 12 Dec 2016 07:14 #11

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
Dear Thomas,
I collected all your messages from forum and placed it here. Please, send only one message in one place and I will answer you. Russian section of forum should be only in Russian language.

For today we have documentation in RUS end ENG only for PC server software. You can find in this topic the link to the Instructions Eng in English and find the link on the PC software in the end of this pdf-document.
As you know, as client for remote control can be used PC client software ExpertSDR2 RC(Remote Client) or Web-version via browser.

Also can be used Raspberry Pi3 board and image for it.
There is no any information how to use it, but it's simple. You should put the image to card and setup the card to board. After power on the RPI3 will started automatically. The RPI3 software has web-page for make settings like in the usual internet routers.

Now the system works in beta mode, but soon after updating the software we will done a short User Manual for it.

We have remote point with PRI3+ColibriDDC in office, which connected to our local antenna and every one can connect to it. It works within two month.
Link for web-client: 95.174.99.52:21698
For ExpertSDR2 Remote client should be used the 5050 port.
The remote point can be used by one person at the same time. Please, close an our remote point if you not used it.
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: Anti

Software 29 Dec 2016 12:19 #12

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
Hi everyone!
Today we published a user manual for the remote control system.
You can find the manual and software over the following link - eesdr.com/en/support-en/software-en
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Software 31 Dec 2016 11:52 #13

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
Hi

Thanks for usermanual

73 Rune
The administrator has disabled public write access.

Software 31 Dec 2016 12:01 #14

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
Hi

During x-mas i have tested remote in the "real world". I spent my x-mas time in Colombia with my wife`s fammilly.
From downtown Meddelin, 5mbit download link and 800kbit upload link. Ping time to Norway was 200ms. This seems to work verry well
even you could notice some delay, however that is not an issue in SSB mode. For cw its another storry :-)

73 Rune LA7THA
The administrator has disabled public write access.
The following user(s) said Thank You: VassiL, Anti

Software 10 Mar 2019 16:23 #15

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 54
  • Thank you received: 5
That page does not exist, gives an error, can you get the correct link? Thanks
EA1AHA JUAN CARLOS
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.095 seconds