Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Colibri - Release of Remote Software?

Colibri - Release of Remote Software? 17 Nov 2016 07:28 #1

Good morning Vasily,

after installing ExpertRS and ExpertSDR2_1.1.3_RC7_Remote and testing all configurations, I could think of,
no contact or remote can be reported.
While I tested then two I had nor problem to contact my ColibriDDC through my local LAN and enjoy RX.

The RPi3OpenWRTRemote_11112016.img was not accepted as image or could not be opened or extracted.
Sorry for my report.

Best regards from Frankfurt
Frank
The administrator has disabled public write access.

Colibri - Release of Remote Software? 17 Nov 2016 14:52 #2

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 247
In a few days I will create a video - How to setup ColibriDDC software for working remote, because some time User manual not so clear for users. You will see it, make the same and all will work well.
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.

Colibri - Release of Remote Software? 25 Nov 2016 14:38 #3

This may have been true for my tries too!
After some work in the network section of my home / intra net ( fixed IPs, disabling homenet group) I easily found the server by
choosing the PCs IP - unstead the ColibriDDS´s - for input into the ExpertSDr2 Remote setup.
At least within my home net I have to say : Eccellent and uninterrupted RX over WLAN !! With full 312 kHz spectrum width.
The door to internet remote I could not find yet. My rooter Setup looks fairly different from the TP-Link in your example.
Some input would be helpful - maybe for others too.

Bestr regards from Frankfurt, Frank
The administrator has disabled public write access.

Colibri - Release of Remote Software? 27 Feb 2017 15:38 #4

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 247
Frank, do you have static internet IP address? Do you have succes to unpack image to RPI flash card?
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.

Colibri - Release of Remote Software? 10 Mar 2019 16:08 #5

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
Have you made the video ?, if so, could you pass, thank you
EA1AHA JUAN CARLOS
This email address is being protected from spambots. You need JavaScript enabled to view it.
The administrator has disabled public write access.

Colibri - Release of Remote Software? 11 Mar 2019 10:07 #6

Good morning Juan Carlos,
I am not shure which configuration you want to install?

- standalone with a raspi 3

like many other guests I too am missing the visual console. And a new version for the RPI3 - promised long time ago.
But using the ExpertRS 0.4.0 would work - like a stealth flight.
My IPv4-DNS-Server reads 192.168.2.1 and after a rather long search I was glad to find the ColibriDDC on 192.168.2.145.
But , while I may not enter a wished IP - missing a console - I do not know why this happend.
Then I found NMAP software, installed it and made a discovery run with 192.168.2.2/254, which listed all IPs including the one with ColibriDDC !!

- over the server software in a pc, to which you connected the ColibriDDC

The new Remote Server and Remote Client seem to work nice.
This time you may use NMAP as well but I found that in the RC Version you simply have to choose the IPv4 address of the pc`s ethernet port
to which you connected the ColibriDDC

Public IP: This works good as long as your momentary IP does not change.
But you can register with No_IP.com for a costless client ID.

Good luck, Frank
The administrator has disabled public write access.

Colibri - Release of Remote Software? 09 May 2019 21:58 #7

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
Hello, I have the Colibri running with the remote of the Raspberry pi 3, I access without any problem remotely.
The problem that has arisen to me is that when trying to enter the configuration of the RPI 3 through 192.168.9.44/admin I asked for the user name and the password, I always entered it by putting root for both, but now I do not gives access to the configuration and tells me that they are not correct: Has happened to any of you ?. Is there a solution that allows me to enter the configuration?
Thank you
The administrator has disabled public write access.

Colibri - Release of Remote Software? 09 May 2019 23:49 #8

  • n1ser
  • n1ser's Avatar
  • OFFLINE
  • Posts: 24
  • Thank you received: 2
Is /admin accessible from outside your network, over the internet? If so you may have been hacked with the default user/pw and someone changed your password. Just a guess.
Scott, N1SER
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 08:34 #9

  • Rome
  • Rome's Avatar
  • NOW ONLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 694
  • Thank you received: 284
We've published new ExpertRemote SW with support of the SunSDR2 DX and a new image with the support of the RPI3+.
eesdr.com/en/software-en/expertremote-en
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 11:59 #10

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
I have installed the Expert RS and the Expert Remote Client. The Expert RS perfectly detects the SunSdr2 DX, but the Expert Remote Client does not detect the SunSDR2 DX.
Attached photos
Do I do something wrong?
IMG_4599.jpg


IMG_4600.jpg
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 12:37 #11

  • Rome
  • Rome's Avatar
  • NOW ONLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 694
  • Thank you received: 284
Please make sure that you 've enabled data sharing here: Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 12:47 #12

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
I think I have it well configured, attached photo of the configuration you tell me


IMG_4601.jpg
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 12:56 #13

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
With this same configuration of the PC, it worked well with Cabrillo
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 13:32 #14

  • Rome
  • Rome's Avatar
  • NOW ONLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 694
  • Thank you received: 284
I just checked the Remote system again in the office, works well: SS2DX is connected to a PC with ExpertRS, I have ExpertRC on the other PC, enter IP address of the SS2DX in the ExpertRC, that's all.
ColibriNANO is not a network device, as other our radios.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Colibri - Release of Remote Software? 24 Jan 2020 13:45 #15

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 38
  • Thank you received: 1
xuanca wrote:
With this same configuration of the PC, it worked well with Cabrillo

Sorry not cabrillo, COLiBRI
Not Colibrí nano
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.175 seconds