Welcome, Guest
Username: Password: Remember me

TOPIC: Remote control SunSDR2 pro with RPi - No go !! Please help

Remote control SunSDR2 pro with RPi - No go !! Please help 13 Feb 2017 07:06 #1

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
Hi there
My second attempt to post this

I have been struggling for weeks now to get my setup sorted out to have my SunSDR2 Pro remotecontrolled over teh I-Net.

Im trying to follow the manual. But no luck so far.

Background
At the remotesite I have a the SunSDR2 Pro and a RPi on the same subnet with fixed private IP-addresses.
The WAN-router is having port forwarding set up for port 5050 and 80.
On the WAN-side I have a fixed public IP-address

Im not using any WLAN ( not needed ), VPN-tunnels, DDNS nor firewall filtering in the RPi special image. I belive that this schould not be needed with my setup. I might be wrong. But the manual is far from clear here Im afraid.

When trying to connect locally to the SunSDR2 Pro via the RPi server with the "remote" version of the client I have no success. The client does not see any radio and I have no working connection status. And server does not seem to find a radio device.

When looking into the RPi-server via the admin-interface Im looking out for some indication on that it can see the SunSDR2 Pro. But I find no place for this information. It would be handy.

When trying to browse the Rpi for a radio I get a browerscreen alright. But no signal allthough the radio works perfectly when running it via the regular client.

So something is very wrong in my setup.

Asking for support / advice / SM0JZT Tilman
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.

Remote control SunSDR2 pro with RPi - No go !! Please help 13 Feb 2017 08:01 #2

  • Rome
  • Rome's Avatar
  • NOW ONLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1054
  • Thank you received: 528
Hi, Tilman.
Could you please attach the screenshot of your browser, when you said: "I get a browser screen alright".
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Remote control SunSDR2 pro with RPi - No go !! Please help 13 Feb 2017 09:01 #3

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
Here screenshot
Capture_Feb13.jpg
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.

Remote control SunSDR2 pro with RPi - No go !! Please help 13 Feb 2017 09:10 #4

  • Rome
  • Rome's Avatar
  • NOW ONLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1054
  • Thank you received: 528
From your screenshot, it looks like the connection is OK if you'll raise the dB scale you'll see the air noise of the transceiver.
Please try to use the other HF antenna connector for your antenna.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: SM0JZT
Time to create page: 0.069 seconds