Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: expert remote 1.3 alpha

expert remote 1.3 alpha 05 Aug 2018 02:00 #1

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
i have installed the new Expertsdr2 remote 1.3

i cannot connent to my remote colibri.

i add the address. found it. start to have connection as show by the picture.

but when i go to switch on or ask list of devices.

i have the list empty.
Attachments:
Last Edit: 05 Aug 2018 02:00 by ik7ytt.
The administrator has disabled public write access.

expert remote 1.3 alpha 05 Aug 2018 08:12 #2

ik7ytt wrote:
i have installed the new Expertsdr2 remote 1.3

i cannot connent to my remote colibri.

i add the address. found it. start to have connection as show by the picture.

but when i go to switch on or ask list of devices.

i have the list empty.

So do I.
what is the fitting server ?
- for Windows and/or RPi3 ?

By the way :
- most of the tools are still grayed out and not available - since years.
- How to find the IP for RPi3b ?
Does everyone need to install Nmap.exe to find the working IP?
Or is it fixed to xxx.xxx.xxx.145 ?

Rgerds from Frankfurt, Frank
The administrator has disabled public write access.

expert remote 1.3 alpha 05 Aug 2018 08:40 #3

  • 3z9am
  • 3z9am's Avatar
  • NOW ONLINE
  • Posts: 23
  • Thank you received: 3
Remote 1.3 alfa looks very good application but is one problem. When i try to tramsmit (sunsdrpro2) nothing to do. Power meter is 0, the same is when push tune button, red led od device but no transmit. Second problem after i install remote 1.3 for 32 bit system, application for 64 bit system crashed after start. Reinstall application but is the same few second after start crash. Application for 32 bit system work ok.
The administrator has disabled public write access.

expert remote 1.3 alpha 05 Aug 2018 10:30 #4

  • sv9djo
  • sv9djo's Avatar
  • OFFLINE
  • Posts: 34
  • Thank you received: 16
By the way there is no base server version 1.3 alpha and previous version claims that work only for 1.2 client I will try it!
The administrator has disabled public write access.

expert remote 1.3 alpha 05 Aug 2018 13:05 #5

  • 3z9am
  • 3z9am's Avatar
  • NOW ONLINE
  • Posts: 23
  • Thank you received: 3
I think is problem in transmiting audio. After turn mox on red light on transceiver and i hear switch relay for transmitting.
I be wait for new version for remote server. I also wiil be very happy to test new beta software as beta tester because i use only remote station and i will very happy to use sundsdr on my remote.
The administrator has disabled public write access.

expert remote 1.3 alpha 05 Aug 2018 13:05 #6

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
I’m using win 10. With last released exper rs version.

I have fix ip. And was working fine win 1.2 version and http.


Also i have anoter issue in local only with sunsdr pro2.
When go in txz the software crash. So can olly receive
The administrator has disabled public write access.

expert remote 1.3 alpha 07 Aug 2018 11:23 #7

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
Some feedback to EE after testing:

I run remote server 0.4 on Win 10 PC as server
The documentation is somewhat weak and unclear for setting up server in Raspberry. Windows is easy and straightforward to set up.
I run remote client 1.3 ( 64 bit ) on PC.

Radio is SunSDR2 Pro
Have set up port forwarding on port 5050 to public IP-adress
Can connect radio/server ok remotely. RX work like a charm, great stuff.
Antenna 3 still seems to be default. cannot change for Antenna 2 or Antenna 1 (VHF) - This would be nice of course
Great to see a drop down meny for bandchange and mode -, that saves space in software window
Cannot use JABRA USB headset although defined in PC with loaded drivers . Both MIC and headphone avail in MME. Software crashes when enabling soundcard after selecting mic and headphone.

RF power output ok after som fiddling with settings. A bit weak output. Can only reach about 6 W PEP with full drive.

Summary- So far so good, pretty robust when all set up. . Looking forward to be able to select antennas
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.
The following user(s) said Thank You: la7tha

expert remote 1.3 alpha 07 Aug 2018 11:27 #8

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
Forgot to above feedback.

Besides my SunSDR2 Pro I also have a SunSDR QRP. When adding it to server. One cannot run any of radios remote. None of the units appear.
Seems that this is a strange bug
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.

expert remote 1.3 alpha 08 Aug 2018 17:02 #9

  • 3z9am
  • 3z9am's Avatar
  • NOW ONLINE
  • Posts: 23
  • Thank you received: 3
On remote server 0.4.1 the same problem. Transmit power 0 . On tune or voice transmit power 0 . My server running on win10 and remote client win10. Mayby I doing it something wrong ? In receiving mode software excellent work.
The administrator has disabled public write access.

expert remote 1.3 alpha 08 Aug 2018 19:55 #10

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
I have installed - Server 0.4.1
Running remote client 1.3 a 1
Running SunSDR2 Pro

Transmission works like a charm. A bit weak output though . About 5 w PEP using SunSDR2 Pro
RX works great with SunSDR2 Pro
No difference when changing RF-gain

I love the dropdownmenues for band and mode selection!! Saves space
I still miss the ability to select antennas......

The server finds both my SunSDR2 Pro and SunSDR QRP
Can select any of my radios from client now. Great. The output from the QRP-radio in RX freezes though after very short session after start/power up. Same result irrespectively of used sample rate. BW about 10 Mbit and ping very low.

Keep up great work !! / Tilman SM0JZT
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.

expert remote 1.3 alpha 08 Aug 2018 19:57 #11

  • SM0JZT
  • SM0JZT's Avatar
  • OFFLINE
  • Posts: 81
  • Thank you received: 7
Forgot (again)

Client software freeses and stops when trying to select USB-headset ( JABRA ) for mike and headphone.
The selections are marked as red and stopping application when trying to enable.
SM0JZT - Tilman D. Thulesius
Sweden
The administrator has disabled public write access.

expert remote 1.3 alpha 09 Aug 2018 02:03 #12

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
installed new Remote server now have
I have installed - Server 0.4.1 on win 10
Running remote client 1.3 a 1 on win 10
with Colibri no problem now. all seams perfect.

Running SunSDR2 Pro. rx is ok. on Tx sunsdr go in tx (software don't crash anymore) but no output power on both tune or mox.

when you select different audio Resources for audio in and out the software crash.

NB1 ....on both colibri and sunsdr seams is not working

on sunsdr only antenna 3 work.

volume looks like need be in range of 80-100 ...if below is completely mute

cannot have SPLIT
The administrator has disabled public write access.

expert remote 1.3 alpha 09 Aug 2018 21:53 #13

  • DK3UD
  • DK3UD's Avatar
  • OFFLINE
  • Posts: 40
  • Thank you received: 9
I just installed the new ExpertRC/RS Remote-Software on my MB1 and external PC (64-Bit versions):
ExpertRC 1.3.0 alpha 1 (64-Bit) and ExpertRS 0.4.1 (64-Bit).

When switching MOX or TUNE, there is no RF-output coming from the MB1. I can see my audio in spectrum display on the remote computer and I hear a relay switching in MB1, but no Output!

Receive mode is working well, still some funtions are missing, but as announced they will follow soon in future versions.

73, Manfred
DK3UD
The administrator has disabled public write access.

expert remote 1.3 alpha 10 Aug 2018 16:11 #14

  • 3z9am
  • 3z9am's Avatar
  • NOW ONLINE
  • Posts: 23
  • Thank you received: 3
After reset my Sunsdr2pro transmiting work ok. :D
The administrator has disabled public write access.

expert remote 1.3 alpha 11 Aug 2018 01:42 #15

  • ik7ytt
  • ik7ytt's Avatar
  • OFFLINE
  • Posts: 23
  • Thank you received: 2
RESET HOW?
I TRY TO MAKE FIRMWARE UPDATE. BUT IS STILL THE SAME.
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.117 seconds