eesdr.com/images/software/ESDR3/ERS_ENG.pdf

its almost in front of your eyes under software eesdr.com/en/software-en/expertremote-en

Thanks was at work did not look

I read that the EESDR2 remote worked only with an earlier firmware version - you may have to read this up. For me, the way I am doing my remote is to set up a VPN tunnel into my remote network where the SunSDR2DX sits. When properly configured I can operate the radio as if I am on the same LAN subnet. If you want to download the ERS, you should be able to find it from the drop down menu on the eesdr.com website under "Software" and then "ExpertRemote system".

Thanks I will try older version lots of work for a remote headed to work and will try again when I get home

Ok so I got v3 remote to work hopefully they will add tx to it sooner than later if I wanted to just receive I would have just used my kiwisdr alot of the reason I bought sunsdr2 dx was because I thought it would have a good remote just stick with my 7300 for remote stuff till v3 gets some updates thanks to all that helped me though. Mack

For V3

Hi all, I have followed the guide and video(thanks) which are excellent.

However, I have tried to register for Cloud server and not had any emails back.

Can anyone help?

Thanks

Peter
G4OFN

G4OFN wrote:
Hi Peter Email Roman,

I suspect there is an issue at times with their conformation servers DNS routing and replying to emails.
He should be able to check or manually resend you the confirmation link.
the either possibility if you have other email account (besides ending in same domain as the one you originally used) is try process again from that different email domain and see if you get confirmation email

Guide for expertsdr2 not 3 alpha please and for sunsdr2 dx model.? is the two at the photo to download and work?

its on the page where you download the sw