Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: CW Skimmer and CW Skimsrv

CW Skimmer and CW Skimsrv 10 Jun 2015 19:30 #1

  • glk
  • glk's Avatar
:?: I am trying to get CW Skimmer to work with ExpertSDR2 & ColibriDDC radio. I have installed CW Skimsrv and the support library. When Skimsrv is running by itself it shows several decoders and appears to be working normally, but as soon as ExpertSDR2 is started, the decoders indicated are "0".

CW Skimmer (latest version 1.83 at " www.dxatlas.com/CwSkimmer/ ") does not recognize the ColibriDDC radio. I cannot get it to work at all with the radio and ExpertSDR2 software. I followed all of the tutorials that I could find, but nothing seems work. "SKM" button in ExpertSDR2 does nothing.

Any ideas? - George
The administrator has disabled public write access.

CW Skimmer and CW Skimsrv 17 Jun 2015 12:54 #2

  • f5otz
  • f5otz's Avatar
  • OFFLINE
  • Posts: 24
  • Thank you received: 5
hello georges
have you take time to read my post called sun sdr 2 the killing machine ???
you will found explanations to configure the shimmer

i can send you directly my own documentation if you want

Best 73 and have a fun with it
The administrator has disabled public write access.

CW Skimmer and CW Skimsrv 17 Jun 2015 23:24 #3

  • glk
  • glk's Avatar
  • OFFLINE
  • Posts: 5
I was not aware of your post. I found it and downloaded the files. Nice work. I will sort through the setup later today. - George
The administrator has disabled public write access.

CW Skimmer and CW Skimsrv 18 Jun 2015 06:50 #4

  • f5otz
  • f5otz's Avatar
  • OFFLINE
  • Posts: 24
  • Thank you received: 5
Super georges

It is my draft ! it could be a good way to update it for all others user

here the configuration is working fine with N1MM software with 2 skimmers (on each receivers) simultaneously with 300 Khz or 196 Khz !!! like SO2R


this is realy a killing machine HI! not enought time to answer to all call sign displayed on the bandmap

see picture attached only 5 minute of activity with one receiver !


if you are following the installation procedure i will be OK
the telnet server is managed by K1TTT software

Best 73 and have a fun !
Lolo F5OTZ
Attachments:
The administrator has disabled public write access.
Time to create page: 0.074 seconds