Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: ExpertSDR software

ExpertSDR software 08 Dec 2016 09:36 #1

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
In this topic we will discuss ExpertSDR2 software for ColibriDDC receiver.

Dear all,
you can download the latest version of the ExpertSDR2 1.1.3 RC9 software for ColibriDDC receiver from the folowing link: eesdr.com/en/products-en/receivers-en/colibriddc-en#downloads

Main changes in the ExpertSDR2:
• Fixed bug in the IQ audio interface for CW Skimmer.
• Fixed bug in the CAT-system, which can freeze the software
• Fixed bug in profiles - non switching the CAT ports after profiles switching
• Fixed bug in the Voltage/temp/current meters - was very slow.
• Fixed bug - the Drive level was not saved by band if the band was changed via CAT system.
• Fixed bug in the OmniRig unit - the frequency can not be changed.
• Was optimized drawing algorithm for waterfall. The CPU load should be decreased.

ColibriDDC:
• Fixed bug. The audio delay was decreased.

Warning! If the software is not offer you to upgrade the firmware automatically, please, do it manually! Options--Device--Expert--Firmware update button.
Василий, Vasily,
Expert Electronics
Last Edit: 09 Dec 2016 09:44 by VassiL.
The administrator has disabled public write access.

ExpertSDR software 16 Jun 2017 09:45 #2

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
Hi, everyone!
Today we've published a new ESDR2 1.2 beta 1 for ColibriDDC.
It improves receiver functionality with the BPF-kit.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

ExpertSDR software 17 Jun 2017 06:10 #3

Good morning Roman,
the ExperSDR2 update came - date precise - as a birthday present!
Now BPF works through the frequency range of the lower 30 MHz.
But, to me it seems, nothing more has been addressed of the "wishes list".
Even the three "front end" BPF switches did not receive shotcuts,
This would make work with the BPF easier .

Best regards, Frank
The administrator has disabled public write access.

ExpertSDR software 19 Jun 2017 06:57 #4

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
HI, Frank,
We remember about new additional control of the BPF-kit, it will be added later, approximately in August/September.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

ExpertSDR software 29 Jun 2017 13:30 #5

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
Hi, everyone!
Today we've released new ExpertSDR2 versions for macOS and Linux.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

ExpertSDR2, Can' Connect anymore 01 Sep 2019 11:27 #6

While ...beta 6 works my ColibriDDC will start working only eventually with ...beta7 - if at all.
The "Information" looks like a normal working status.

Colibri_beta_6_7.jpg


After some rare opportunities enjoying a working...beta 7 I have to say:
The recording in HDSDR mode is a very wellcomed achivement !
It shows that the coding team looked into HDSDR drawer.
And why not modernising the ExtIO_ColibriDDC.dll -
to fullfill the EESDR`s promise, that it may be used with Sharp SDR#
Regards from Frankfurt, Frank
The administrator has disabled public write access.

ExpertSDR software 04 Sep 2019 22:36 #7

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 54
  • Thank you received: 5
Hi, I have a colibri receiver that worked with software version 1.2.
today I installed software version 1.3.0 RC1, well, when it starts it tells me that I have to update the firmware, I say yes and then this message appears:

Firmware is updating.Dont turn the power off
Connection

It's like this for a few minutes until I get the following error message:
Firmware update error! Can not go into bootloader mode

This happens to me with both version 1.2 and 1.3 RC1.
If I do this myself with a MacBookPro computer, the procedure does it perfectly. The problem is that when I use the program again with Win 10, I never update the firmware.
What can I do to solve this problem?

JUAN CARLOS
EA1AHA
The administrator has disabled public write access.

ExpertSDR software 05 Sep 2019 07:19 #8

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
You can check that port 50001 is not blocked by some other software on your Windows computer. The UMA describes fully.

Or you can send a message directly to Roman at EE. He will help you.
The administrator has disabled public write access.

ExpertSDR software 05 Sep 2019 07:29 #9

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
Please let us know what is receiver's IP address when you connect it to your Windows PC and MacBook?

Firmware procedure description, just in case:
Please install the latest version of the ESDR2 v 1.3 RC1. Then you need to enter the boot-loader mode manually:
1. Switch off the receiver with the PWR button;
2. Press and hold the BT button on the rear panel of the receiver (you will hear a light click), switch on the receiver with the PWR button. The LED will blink with a single green light;
3. Release the BT button;
4. Open ESDR2 software and open Options-> Device menu, Expert tab and press Firmware update.
5. After the firmware update is finished, LED will turn to constant yellow light.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

ExpertSDR software 05 Sep 2019 07:31 #10

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 54
  • Thank you received: 5
Thanks for your response, I already have it working, the same if it was a problem with the 5000 port, since using another computer that I have with Win 10 I made it to the first.
Now the problem I have is that to start the program, pressing the upper left icon does not start at the first one, I must give it several times to start it. I am using software version 1.3.0 RC1. Can anyone tell me what can happen?

JUAN CARLOS
EA1AHA
The administrator has disabled public write access.

ExpertSDR software 05 Sep 2019 07:35 #11

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 54
  • Thank you received: 5
Thanks Roman, the IP is the same on both computers, it is 192.168.0.33

JUAN CARlOS
EA1AHA
The administrator has disabled public write access.

ExpertSDR2, Can' Connect anymore 05 Sep 2019 08:38 #12

:?:fddselber wrote:
While ...beta 6 works my ColibriDDC will start working only eventually with ...beta7 - if at all.
The "Information" looks like a normal working status.

Colibri_beta_6_7.jpg


After some rare opportunities enjoying a working...beta 7 I have to say:
The recording in HDSDR mode is a very wellcomed achivement !
It shows that the coding team looked into HDSDR drawer.
And why not modernising the ExtIO_ColibriDDC.dll -
to fullfill the EESDR`s promise, that it may be used with Sharp SDR#
Regards from Frankfurt, Frank

While there seem to be no response of my ColibriDDC problem in RC1, I have to point once again to the fact, that my ColibriDDC refuses to start.
Precisely discribed it may start sometimes after 5 or more times, pressing the on/off button.
Now I like to give you a hint: Maybe the coders fogot that there are ColibriDDCs with a BPF installed .
And they need some more time to wake up when started ???

Regards from Frankfurt
Frank
The administrator has disabled public write access.

ExpertSDR software 09 Sep 2019 18:07 #13

  • xuanca
  • xuanca's Avatar
  • OFFLINE
  • Posts: 54
  • Thank you received: 5
Hello Rome, I am trying to answer your email today, but the server tells me that it does not find the recipient, can you give me another email address to send you the manuals that I told you? Thank you
The administrator has disabled public write access.

ExpertSDR2, Can' Connect anymore 10 Sep 2019 11:41 #14

Today, after 15 tries the ColibriDDC & BPF finally started.
In RC2 nothing has changed.

Regards, Frank
The administrator has disabled public write access.
Time to create page: 0.125 seconds