Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: CW-R, pitch and set TX frequency when used with transceiver

CW-R, pitch and set TX frequency when used with transceiver 25 Feb 2019 07:43 #1

  • HA5X
  • HA5X's Avatar
  • OFFLINE
  • Posts: 45
  • Thank you received: 6
Hi, I just got a Colibri Nano and playing with it: it is sync'd to my Icom transceiver. It works fine, but there are a few things I seem to miss.

1) when sync'd, the Icom goes to CW-R mode. Can EESDR2 work on CW using the other sideband?
2) the pitch of the CW tone is quite different on the radio and the Colibri. Is it possible to change the pitch?
3) Is it possible to set which of the two VFOs is sync'd to the transceiver? I would like to listen to both Colibri VFOs but transmit on the other VFO frequency only. So I am looking for an easy way to set the TX QRG of the TCVR from inside the EESDR2 software.
But because it is just a receiver, the software does.not have the TX button like it has in the SunSDR2Pro software...
The administrator has disabled public write access.
Time to create page: 0.141 seconds