Welcome, Guest
Username: Password: Remember me

TOPIC: WebClient and SunSDR DX

WebClient and SunSDR DX 17 May 2020 18:37 #1

  • mir
  • mir's Avatar
  • OFFLINE
  • Posts: 3
I installed ExpertRS and also ran the Apache web server according to ExpertElectronics on the Remote Software tab and start.bat. On the remote PC I start the browser, I see the spectrum, Waterfall the buttons TX and Tone but I only have noises and no audio signal. If I press the button TX or TONE then the TX goes to send. In the spectrum and in the waterfall I have no signal. Why don't I have audio? OS for me is WIN10 and ExpertRS 0.6.6 for Windows. Installed. Rxtx is SunSDR DX.
Attachments:
Last Edit: 17 May 2020 18:39 by mir. Reason: translate from Germ to EN
The administrator has disabled public write access.

WebClient and SunSDR DX 17 May 2020 20:27 #2

  • xuanca
  • xuanca's Avatar
  • NOW ONLINE
  • Posts: 37
  • Thank you received: 1
Do you have the A3 antenna selected?

EA1AHA
Juan Carlos
The administrator has disabled public write access.

WebClient and SunSDR DX 17 May 2020 22:41 #3

  • DL9NBJ
  • DL9NBJ's Avatar
  • NOW ONLINE
  • Posts: 45
  • Thank you received: 14
It is the same for me.

I can't select an antenna in the browser window, can I?
vy 73 de Thilo DL9NBJ
The administrator has disabled public write access.
The following user(s) said Thank You: mir

WebClient and SunSDR DX 17 May 2020 23:10 #4

  • xuanca
  • xuanca's Avatar
  • NOW ONLINE
  • Posts: 37
  • Thank you received: 1
If I'm not mistaken, the remote only works with the A3 antenna selected

EA1AHA
Juan Carlos
The administrator has disabled public write access.
The following user(s) said Thank You: mir

WebClient and SunSDR DX 18 May 2020 15:44 #5

  • mir
  • mir's Avatar
  • OFFLINE
  • Posts: 3
Thank you for the good tip, audio reception now works, but the A3 antenna must be set beforehand with expertSDR2 DX. But I still have another problem. When I press TX or TONE I have no output power. Drive is set to 100%
The administrator has disabled public write access.

WebClient and SunSDR DX 19 May 2020 08:29 #6

  • DL9NBJ
  • DL9NBJ's Avatar
  • NOW ONLINE
  • Posts: 45
  • Thank you received: 14
It seems that this has not yet been done for the SUNSDR2DX. When a new device comes onto the market, it would be very pleasant for the customer if the software is ready for it.
vy 73 de Thilo DL9NBJ
The administrator has disabled public write access.
The following user(s) said Thank You: mir

WebClient and SunSDR DX 19 May 2020 08:31 #7

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 658
  • Thank you received: 269
All devices are equally supported via WEB-client:
- only one antenna input is available, at the moment
- TX mode is not available for all devices

At the end of May, we'll have a big reveal on our YouTube channel, please stay tuned.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: mir, DL9NBJ

WebClient and SunSDR DX 25 May 2020 14:50 #8

  • DL9NBJ
  • DL9NBJ's Avatar
  • NOW ONLINE
  • Posts: 45
  • Thank you received: 14
I'm so excited,
And I just can't hide it,
And I know, I know, I know, I know
I know I want it, want it. Yeah
vy 73 de Thilo DL9NBJ
The administrator has disabled public write access.

WebClient and SunSDR DX 25 May 2020 22:32 #9

  • KI5FTY
  • KI5FTY's Avatar
  • OFFLINE
  • Posts: 24
  • Thank you received: 5
Roman what date is the big reveal?
Lou ki5fty
The administrator has disabled public write access.

WebClient and SunSDR DX 26 May 2020 06:56 #10

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 658
  • Thank you received: 269
Hi, either this Friday or during the next week.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: G4KVT
Time to create page: 0.134 seconds