Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Expert SDR3 version 0.11.0 alpha

Expert SDR3 Zoom Position Blue Triangle 07 Feb 2022 21:06 #16

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
I am unable to figure out the intended purpose of the blue triangle on the ExpertSDR3 display.
I have a 3 button mouse and use windows11 with ExpertSDR3.
Nothing get zoomed when I tried manipulating the blue triangle. Instead the frequency becomes very unstable and fine tuning becomes impossible.
The documentation doesn't seem to provide much detail.
Is this a useless decoration on the panadapter?
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 08 Feb 2022 02:07 #17

  • VA3WU
  • VA3WU's Avatar
  • OFFLINE
  • Posts: 4
  • Thank you received: 2
I'm still looking for the analog looking S meter and a squelch that works in ssb mode.
The administrator has disabled public write access.
The following user(s) said Thank You: DK8JV

Expert SDR3 Zoom Position Blue Triangle 08 Feb 2022 13:01 #18

  • kc2rgw
  • kc2rgw's Avatar
  • OFFLINE
  • Posts: 99
  • Thank you received: 33
It's the center point of the zoom range.

To zoom, right click and hold on the bar where the blue arrow is and drag left and right.

once you have zoom in place if you left click and drag the blue triangle it will shift the center of the display left and right.
The administrator has disabled public write access.
The following user(s) said Thank You: G3XLG, SamWalker

Expert SDR3 version 0.11.0 alpha 08 Feb 2022 23:23 #19

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
There appears to be some compatible issues with SDCx64 and Expert SDR3.
I use TCI to rig interface my logging software from N3FJP.
The problem start when I am attempt to split a frequency on my ExpertSDR3 panadapter while running TCI.
The problem goes away when TCI is disabled.
There are other aspect of SDCx64 that works intermittently and require frequent restarts. One of them is MACRO
I don't know if the problem is SDCx64 or Expert SDR3.
ExpertSDR3 works beautifully without SDC.
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 09 Feb 2022 07:01 #20

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1054
  • Thank you received: 529
Hi, Sam.
Could you please make a short video of the issue you are talking about and send it to us.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 09 Feb 2022 12:23 #21

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
Here is a screen recorder I made.
Last Edit: 09 Feb 2022 12:42 by SamWalker.
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 09 Feb 2022 13:54 #22

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1054
  • Thank you received: 529
Nothing is attached, you can just upload it on some cloud service like Google Drive and send me a link.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 09 Feb 2022 15:43 #23

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 624
  • Thank you received: 294
Sam

make sure your SDC client is up to date the current version is 15.24X64

you can check this on the SDC SETUP tab and press check for new update?
73 Rick
The administrator has disabled public write access.
The following user(s) said Thank You: SamWalker

Expert SDR3 version 0.11.0 alpha 09 Feb 2022 18:30 #24

  • kc2rgw
  • kc2rgw's Avatar
  • OFFLINE
  • Posts: 99
  • Thank you received: 33
Have any of the rest of you noticed some peculiar RX AGC behavior?

The ANC and even the normal AGC behavior in SSB mode seem to pump and breathe oddly. Quick one or two word transmissions don't tend to be "grabbed" fast enough and then the slope and hold time also seems a bit off.

I notice this a lot in larger groups when people are quickly breaking in, a strong station will swamp the AGC, so if it's followed by a weaker station they will be dropped way down. If there is a lot of fading the AGC won't release fast enough if the band drops during a longer transmission.

Just curious if others have noted the same behavior? It's a lot more noticeable in lower signal conditions or bands fading in and out rapidly.
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 10 Feb 2022 00:43 #25

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
I upgrade to the latest version of SDC_15.24x64 Nothing changed. Problem remains. Erratic behavior with split frequency when TCI is enabled.
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha 25 Feb 2022 20:57 #26

  • Tom_G0JSV
  • Tom_G0JSV's Avatar
  • OFFLINE
  • Posts: 74
  • Thank you received: 29
The world is a mess.
The administrator has disabled public write access.

Expert SDR3 version 0.11.0 alpha EESDR3 - malfunctions after idling for hours. 26 Feb 2022 03:18 #27

  • N9PY
  • N9PY's Avatar
  • OFFLINE
  • Posts: 35
  • Thank you received: 4
Recently I have left my MB-1 running EESDR3 alpha 11 for several hours and often overnight.
Usually, when I come back EESDR is malfunctioning. If I hit the mute button, the band manager window pops up. Also the AGC button is not functional.
I sure there are several odd behaviors also. Closing and reopening the EESDR3 window fixes it all


73 Torrey N9PY
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.080 seconds