Welcome, Guest
Username: Password: Remember me

TOPIC: EESDR3 0.12.0 Alpha

EESDR3 0.12.0 Alpha 15 Mar 2022 21:29 #16

  • oz1ctz
  • oz1ctz's Avatar
  • OFFLINE
  • Posts: 19
  • Thank you received: 4
Hi ..
Press the BM button on the top line .. In the new window you vil find all the controls for each band ..

73 de Brian
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 15 Mar 2022 22:39 #17

  • Gerben
  • Gerben's Avatar
  • OFFLINE
  • Posts: 32
  • Thank you received: 3
Thanks Brian!
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 03 Apr 2022 15:58 #18

What is the difference between the FT8 button and DIGU in practical terms, both seem to work OK using digi modes
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 03 Apr 2022 18:21 #19

also whilst I remember using EESDR V3 how do you enlarge the DX Spots on the radio screen, mine are so small I can hardly read them..
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 04 Apr 2022 06:48 #20

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
The meaning of the FT8 button is it activates the filter preset for this exact DIGI mode, that's all at this point.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 04 Apr 2022 15:49 #21

Thanks - 73 Tom
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 04 Apr 2022 16:19 #22

Another question about EESDR 3.0.12.1a When I change bands the power goes back to zero and I have to re-set. In settings I have PA - save by band ticked.
Is this incorrect or is there something else I need to set up?
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 05 Apr 2022 07:15 #23

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
It's a bug, please make a short video and report the bug via GitHub, attach a settings file to the report.
github.com/ExpertSDR3/ExpertSDR3-BUG-TRACKER
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 07 Apr 2022 23:50 #24

When using TCI from JTDX and MHSV, I get power out on FT8 but there is no audio out of JTDX. I have seen the like 110W+ out on JTDX and was able to reduce the drive. Not sure where that bug lies.
When using MHSV, on 20m, I get about 20w out. On other bands, I don't get anything.
On the software, I don't see the TCI mic slider bar anymore. I did at first but I no longer see the bar. when transmitting.

SSB and Tune work on all bands. Great radio. Love it.


Radio: SunSDR DX
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 08 Apr 2022 21:17 #25

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 624
  • Thank you received: 294
N5SKT wrote:
When using TCI from JTDX and MHSV, I get power out on FT8 but there is no audio out of JTDX. I have seen the like 110W+ out on JTDX and was able to reduce the drive. Not sure where that bug lies.
When using MHSV, on 20m, I get about 20w out. On other bands, I don't get anything.
On the software, I don't see the TCI mic slider bar anymore. I did at first but I no longer see the bar. when transmitting.

SSB and Tune work on all bands. Great radio. Love it.


Radio: SunSDR DX

And you will no longer see the TCI audio slider move , it was locked in last few alphas releases, Placing the Audio drive level back on the application

Also NOTE the FT8 function in the EESDR application at this point only sets a filter that is all, and frankly at this point your better off using the actual DIGU mode, which allow you to adjust the bandwidth / filtering as you require

In time the FT8 option along with a few others listed there the intent is to Build the application into the EESDR3 software itself , which then would require no 3Rd party application to use FT8 and other listed modes, but these will come Much later. there listed there now for Place holders in the layout

In MSHV you can your the power slider mode to set the level of TCI audio
simply change your BAR meter to the MIC level- then in MSHV adjust the slider so your just shy of 0, personally I run -1 to -0.7 and found them to offer good levels on TX and power adjustments using the power slider
73 Rick
Last Edit: 08 Apr 2022 21:19 by N8SDR.
The administrator has disabled public write access.
The following user(s) said Thank You: Rome, Brian

EESDR3 0.12.0 Alpha 21 Apr 2022 13:38 #26

OFFLINE
Posts: 51

also whilst I remember using EESDR V3 how do you enlarge the DX Spots on the radio screen, mine are so small I can hardly read them..
The administrator has disabled public write access.

EESDR3 0.12.0 Alpha 22 Apr 2022 22:58 #27

  • K3CDY
  • K3CDY's Avatar
  • OFFLINE
  • Posts: 25
  • Thank you received: 6
I don't believe there is any specific adjustment for Spots font size itself. However, you can scale the entire Application interface with the magnifying glass icon in the lower RH corner of the screen. I don't know if the MB1 has this capability however.

My application interface is scaled to 140% and everything is quite readable for my old eyes with my SunSDR2DX.
73
Bill
K3CDY
Last Edit: 22 Apr 2022 23:01 by K3CDY.
The administrator has disabled public write access.

How do I manually switch from Antenna A2 to A3. 26 Apr 2022 00:43 #28

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
:unknown: :unknown:
Help! I am unable to figure out how to switch from antenna A2 to antenna A3
I am using ExpertSDR3 3.12.1 alpha
I have been using ExpertSDR3 since it was released and I am very happy with it.
Last Edit: 26 Apr 2022 00:45 by SamWalker.
The administrator has disabled public write access.

How do I manually switch from Antenna A2 to A3. 26 Apr 2022 00:50 #29

  • W3FRG
  • W3FRG's Avatar
  • OFFLINE
  • Posts: 42
  • Thank you received: 8
For SDR2 clk on ANT and a menu will drop down.
Clk on the ant A2, A3 that you want.

For SDR3 Clk on B.M
A table will appear, and you can then select A2 or A3

GL Tom W3FRG
The administrator has disabled public write access.
The following user(s) said Thank You: SamWalker

How do I manually switch from Antenna A2 to A3. 26 Apr 2022 08:21 #30

  • SamWalker
  • SamWalker's Avatar
  • OFFLINE
  • KC5SW in Euless, TX
  • Posts: 78
  • Thank you received: 26
I did notice that BM button but I was hoping that there was some sort of toggle switch was available. Thanks again , Tom.

In the ZZZZone!
The administrator has disabled public write access.
Time to create page: 0.096 seconds