Welcome, Guest
Username: Password: Remember me

TOPIC: EESDR3 and N1MM

EESDR3 and N1MM 27 Mar 2022 20:26 #1

I cannot get N1MM to read the frequency from my SunSDR2DX using EESDR3. It works very well using EESDR2 but I cannot find a way to change COM portsd using EESDR3 and I cant find a video on You Tube. TCI works but only to send spots to my screen, but the CAT is not working. Can anyone assist?
The administrator has disabled public write access.

EESDR3 and N1MM 27 Mar 2022 23:23 #2

  • SM0JCA
  • SM0JCA's Avatar
  • OFFLINE
  • Posts: 64
  • Thank you received: 11
N1MM+ does not connect directly to TCI.
The new software Radiosync (Software=> Sowtware with TCI support) is used as a bridge between EESDR3 and N1MM.
There are no comports in ESDR3, only TCI
In order for N1MM to connect, you have to create a virtual Comport pair.
EESDR3 TCI-> Radiosync TCI to Comport -> Virtual Serial Comport pair-> N1MM

73 de Erik SM0JCA
Last Edit: 27 Mar 2022 23:26 by SM0JCA.
The administrator has disabled public write access.

EESDR3 and N1MM 28 Mar 2022 12:15 #3

Erik is it possible to sent me a screen shot of settings of RigSync page. I have already set three pairs of com ports. My PC only hasd COM1 so I have created 345678 and 3 and 4 work fb with logger COM5 and 6 work fb with EESDR2 sao I have spare 7 and 8. Can you send me a screen shot of what my settings should be as I have tried but N1MM still ca\nt connect to EESDR3

Sorry for being a non geek

Tom
GM4FDM
The administrator has disabled public write access.

EESDR3 and N1MM 28 Mar 2022 16:20 #4

  • SM0JCA
  • SM0JCA's Avatar
  • OFFLINE
  • Posts: 64
  • Thank you received: 11
Don´t use Rigsync, download and use the new Radiosync!
ESDR3 has only TCI so you need Radiosync to connect to comport.
/Erik
Last Edit: 28 Mar 2022 16:23 by SM0JCA.
The administrator has disabled public write access.
The following user(s) said Thank You: GM4FDM

EESDR3 and N1MM 28 Mar 2022 17:38 #5

OK Erik, I have it now using RadioSync thank you so much


Tom
GM4FDM
The administrator has disabled public write access.

EESDR3 and N1MM 29 Mar 2022 21:40 #6

  • VE3EY
  • VE3EY's Avatar
  • OFFLINE
  • Posts: 29
  • Thank you received: 5
Hi Tom. If you are using Rigsync for both CAT control and PTT keying, you may have to set the PTT delay to at least 100ms in N1MM+ (or any other loggers) for it to work reliably with EESDR 0.12.* Otherwise you may experience frequent disconnects from the radio.
The administrator has disabled public write access.

EESDR3 and N1MM 03 Apr 2022 15:39 #7

roger, noted..
The administrator has disabled public write access.
Time to create page: 0.100 seconds