Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: E-coder question

E-coder question 17 Sep 2019 04:19 #1

  • S58WW
  • S58WW's Avatar
  • OFFLINE
  • Credo, quia absurdum est
  • Posts: 89
  • Thank you received: 24
I have small issue during using E-coder under linux.
I have two encoders. Under Windows i have them setup one for VFO A and other for VFO B. They are working as they should.
Under linux i always make that commands befor using Expert SDR2 SW::

sudo chmod 664 /dev/hidraw*
sudo chgrp plugdev /dev/hidraw*

But only one is working. Even if one is active aleredy, if i set second for VFO B, the same one is responding ... The other is "dead". :wall:

I am using new RC2 version of ExpertSDR2. Linux is UBUNTU 18.04. x64.

Any suggestions or ....?
73 Pibo S58WW
SUNSDR2pro S/N EED05521500187
PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 250 GB INTEL NVMe M.2
Last Edit: 17 Sep 2019 04:24 by S58WW. Reason: addon
The administrator has disabled public write access.
Time to create page: 0.163 seconds