Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Sunsdr2 PRO can't connect

Sunsdr2 PRO can't connect 06 Aug 2021 02:31 #1

So I have spent several hours for the past six days going through every instruction on this forum and online on how to set up sunsdr2 pro and I have tried on several different computers. In short, I have been able to change the IP address and the port. The software can discover the radio but it cannot connect. I have searched the windows command prompt to ensure I have a free IP address, I have uninstalled anydesk. I have uninstalled the expertsdr to ensure I have the current version of the software. I have tried connecting with expertsdr3. I have contacted gigaparts who I bought it from and they offer no support. I have emailed expert electronics. I have tried everything, I am still waiting to hear back from expert electronics after two days. I followed their instructions to no avail. Can anybody help?

Tom - KD8VVL
The administrator has disabled public write access.

Sunsdr2 PRO can't connect 21 Aug 2021 12:02 #2

  • IU3PDF
  • IU3PDF's Avatar
  • OFFLINE
  • Posts: 1
  • Thank you received: 1
Hi Tom,
Do you have installed anyDesk? because it use the same port of your SunSDR2 !
If so, unistall it and try again, it will run!

73
KD8VVL de IU3PDF (Andrea)
The administrator has disabled public write access.
The following user(s) said Thank You: SA0BYP

Sunsdr2 PRO can't connect 04 Apr 2022 23:55 #3

  • w4ien
  • w4ien's Avatar
  • OFFLINE
  • Posts: 21
  • Thank you received: 1
Thank you VERY much.
The administrator has disabled public write access.

Sunsdr2 PRO can't connect 27 May 2022 01:44 #4

  • W9OD
  • W9OD's Avatar
  • OFFLINE
  • Posts: 6
  • Thank you received: 1
Hello everyone,
I just got the SUNSDR2 Pro at Dayton. I run a Mac and am having trouble getting things to work. The software sees the radio and recognizes the serial number. It does not connect with the radio. The light keeps flashing green. I am not computer savvy ish. So, I need some help. I have had and still have my Elecraft K3 fully loaded and am not happy with the way they are going. Figure it is time to try something new. If there is a place with STEP BY STEP instructions to work with the Mac, please let me know.
Thank you and 73 Craig W9OD
The administrator has disabled public write access.

Sunsdr2 PRO can't connect 27 May 2022 06:02 #5

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1049
  • Thank you received: 528
Hello Craig.
Check out the FAQ page on our web-site - eesdr.com/en/faq-en
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: W9OD

Sunsdr2 PRO can't connect 20 Jul 2022 13:01 #6

Why, for Christ and everyone sakes they don't put in in red capital letters visible everywhere: UNINSTALL ANYDESK FIRST OF ALL!
I have spent lots of time trying to connect with this radio, I got exactly same symptoms describet above, I even bought a new router, since that was my only guess, the router should be defective since if I connect the radio directly to the PC it finds it OK, but when through the router, no way.

73 Ed PY2RN
The administrator has disabled public write access.

Sunsdr2 PRO can't connect 20 Jul 2022 20:50 #7

  • W9OD
  • W9OD's Avatar
  • OFFLINE
  • Posts: 6
  • Thank you received: 1
I want to thank everyone for the advice! I am getting a handle on the SunSDR 2 Pro. I am obviously still learning, and will have more questions as time goes on. For now I am having a blast with this sweet radio. Again, thank you from a work in progress. 73, W9OD
The administrator has disabled public write access.
The following user(s) said Thank You: Rome
Time to create page: 0.090 seconds