Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Mac ColibriDDC ICOM RadioSync

Mac ColibriDDC ICOM RadioSync 07 Mar 2022 15:51 #1

On the Mac, I want to drive the SDR via the ICOM (VFO) so that the frequencies on the ICOM match those displayed on the Colibri.
- The Colibri is on 192.168.0.145:50005
- The ICOM is connected via CAT (and the software receives the info from the TX)
- RadioSync indicates that transceiver 1 is OK for TCI
- RadioSync indicates that transceiver 1 is OK for CAT
But impossible to control the frequency on the Colibri, the same with JTDX which cannot discuss with the Colibri

Sur Mac, je souhaite piloter le SDR via l'ICOM (VFO) pour que les fréquences sur l'ICOM correspondent à celles affichées sur le Colibri.
- Le Colibri est sur 192.168.0.145:50005
- L'ICOM est connecté via CAT (et le logiciel recois les info du TX)
- RadioSync indique que le transceiver 1est OK pour le TCI
- RadioSync indique que le transceiver 1est OK pour le CAT
Mais impossible de piloter la fréquence sur le Colibri, idem avec JTDX qui n'arrive pas a discuter avec le Colibri
Has anyone had success driving the SDR on a Mac?
Attachments:
The administrator has disabled public write access.
Time to create page: 0.076 seconds