Эксперт Электроникс - Expert Electronics - Topic: ExpertSDR2 software for MB1 (10/14)

Welcome, Guest

TOPIC: ExpertSDR2 software for MB1

ExpertSDR2 software for MB1 21 Jul 2020 07:38 #136

G3XLG
OFFLINE
Posts: 38
Thank you received: 13

Thanks Erik.
I am subscribed to this thread and the 2 or 3 useful tutorials were great & not irrelevant. However all we needed to know was to identify the problem, hear your useful suggestions/tutorials & finally hear how the problem was resolved. It was all the other extraneous emails (from Mark) with several repeated versions of his problem, including 2 or was it 3 passwords for his Team Viewer.etc that became too much..
Maybe I'm just a grumpy old man but thanks for your understanding....
Ray G3XLG

The administrator has disabled public write access.

ExpertSDR2 software for MB1 21 Jul 2020 19:19 #137

g0cgl
OFFLINE
Erik EI4KF / G0CGL
Posts: 390
Thank you received: 206

Well, nearly gone. Like a bad penny, reporting:
a) Mark's problem resolved (Windows sound system problem, follow the tutorial in this thread if you encounter something similar)

b) Update 6 now released for all EE products including MB1

c) Only for MB1, the Utility 1.1.2 is replaced with 1.1.3. The old version needs a full uninstall and reboot before installing the new version.

b) and c) on the download page(s).

The administrator has disabled public write access.

The following user(s) said Thank You: Rome

ExpertSDR2 software for MB1 22 Jul 2020 09:55 #138

HB9FXU OFFLINE Posts: 8 Thank you received: 1	Hi Erik Thank you for the info. Do you know the changes or improvments in update 6 ? 73 de Thomas
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 22 Jul 2020 11:53 #139

g0cgl OFFLINE Erik EI4KF / G0CGL Posts: 390 Thank you received: 206	Hello Thomas, Not officially yet but I have asked Roman for release notes and he is liaising with the programmer to collate the changes and improvements. Erik.
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 22 Jul 2020 15:20 #140

HB9FXU
OFFLINE
Posts: 8
Thank you received: 1

Hi Rome
I just installed your Update 6 of ExpertSDR2 after you published the Release notes.

I discovered a major problem with Antenna Tuner:
When the software is started up, you only can tune once. When you, as example, change the band and press "Tune", the tuner does not work. So tuning only works once.
To solve this you need to switch of the software and switch on again then you can tune one time again.

Do others also discover this issue ? If yes, please fix as soon as possible

Thanks and 73 de Thomas

The administrator has disabled public write access.

ExpertSDR2 software for MB1 22 Jul 2020 17:15 #141

DK3UD OFFLINE Posts: 15	Hi Thomas, I do have the same issue here with MB1 and new version of ESDR2 1.3.1 Update 6 !!! 73, Manfred DK3UD
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 22 Jul 2020 17:35 #142

roger OFFLINE Posts: 1	Hi Vasily. I have a question regarding the latest software update for the 1.1.3 RC6 version. It says that the Ceesb audio bandwidth is expanded from 0 hz to 5 khz. My MB1 is already capable of wide audio bandwidth that exceeds this updated value. Does this mean the update will now limit my eesb capabilities? Your help is greatly appreciated. Regards, Roger AA1LY
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 22 Jul 2020 17:39 #143

DK3UD OFFLINE Posts: 15	Hi Thomas, I found a workaround for the ATU problem other than restarting the software: You can also tune once after switching bandscope on and off or after switching RX2 on and off! 73, Manfred DK3UD
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 23 Jul 2020 07:54 #144

Rome OFFLINE Quod Licet Jovi Non Licet Bovi Posts: 286 Thank you received: 139	Thanks for the report of the tuner issue, we'll take a look at it ASAP.
	Роман, Roman Expert Electronics The administrator has disabled public write access. The following user(s) said Thank You: HB9FXU

ExpertSDR2 software for MB1 23 Jul 2020 08:37 #145

sm4ive OFFLINE CW is King VHF-SHF EME Posts: 47 Thank you received: 6	RX 2 works as you said but not BS but the tuner does not adjust swr to good level hmmmm
	Last Edit: 23 Jul 2020 08:38 by sm4ive. The administrator has disabled public write access.

ExpertSDR2 software for MB1 23 Jul 2020 09:16 #146

Rome OFFLINE Quod Licet Jovi Non Licet Bovi Posts: 286 Thank you received: 139	Regarding the CESSB, that's right this Clipper limits the TX bandwidth to 5 kHz. This limit still exceeds allowed TX bandwidth in SSB.
	Роман, Roman Expert Electronics The administrator has disabled public write access. The following user(s) said Thank You: R3IIN

ExpertSDR2 software for MB1 30 Jul 2020 15:39 #147

HB9FXU OFFLINE Posts: 8 Thank you received: 1	Hi Roman What about the tuner issue in Update 6 ? It is really disturbing that we cannot use the tuner as it should be Thank you ! 73
	The administrator has disabled public write access. The following user(s) said Thank You: DK3UD

ExpertSDR2 software for MB1 31 Jul 2020 12:57 #148

DK3UD OFFLINE Posts: 15	HB9FXU wrote: Hi Roman What about the tuner issue in Update 6 ? It is really disturbing that we cannot use the tuner as it should be Thank you ! 73 The same issue with me! Please repair this bug as soon as possible! Thank you! - Manfred - DK3UD
	The administrator has disabled public write access.

ExpertSDR2 software for MB1 31 Jul 2020 13:09 #149

Rome OFFLINE Quod Licet Jovi Non Licet Bovi Posts: 286 Thank you received: 139	Please try this pre-release of Update 7 - drive.google.com/file/d/1LvNDbsPsGzJHqlVy0iP6t18S5E4ZAhTW/view?usp=sharing If it won't work for you use Update 5 for now. I and the main programmer will be on vacation in the following weeks.
	Роман, Roman Expert Electronics The administrator has disabled public write access.

ExpertSDR2 software for MB1 31 Jul 2020 22:35 #150

DK3UD OFFLINE Posts: 15	Hi Rome, thanks for your efforts. But the pre-release 1.3.1 update 7 (MB1) is not ok either. ATU is not working correctly. There is still the One-Time-Tune effect after power on. And I have the impression the ATU does not find the minimum SWR which would be possible. Enjoy your holidays, Rome! 73, Manfred DK3UD
	The administrator has disabled public write access.

ExpertSDR2 software for MB1