Welcome, Guest
Username: Password: Remember me
This category was created to discuss various questions and topics regarding ExpertSDR2 operation.

TOPIC: switching tx from rx1 to rx2

switching tx from rx1 to rx2 21 Nov 2021 17:37 #1

Hi. really enjoying the sunsdr2-dx, had it for a week or so mow. these is one thing i cannot figure out. so i have both rx1 and rx2 open,
i can tx on rx 1 but i want to swap and tx on rx2 (eesdr2) how do i do this ?
many thanks
The administrator has disabled public write access.

switching tx from rx1 to rx2 22 Nov 2021 11:51 #2

  • danielwee
  • danielwee's Avatar
  • OFFLINE
  • Posts: 90
  • Thank you received: 15
You can select which transmitter to use the MOX associated with the RX2,

Screenshot2021-11-22194844.png


Alternatively, if you are using E-Coder or E-Coder2 to key the PTT, you can select which transceiver you would like to key from the Options->Panel tab:-

Screenshot2021-11-22195010.png


Basically, each radio has it's own PTT line and you select the radio to transmit on by the PTT that you use.
Last Edit: 22 Nov 2021 11:54 by danielwee.
The administrator has disabled public write access.
The following user(s) said Thank You: Rome, g0vxe

switching tx from rx1 to rx2 22 Nov 2021 18:37 #3

thank you for your detailed reply. i think i was looking past the obvious. also interesting about the ptt line comment. now i have set up ptt line in com port settings for both receivers and now can use for example wsjt on 2 bands and easily jump the tx. ime using sdc macros for cw (pileup) keying and on a closer look there is a option to chose between rx1 and rx2. so all is well many thanks
The administrator has disabled public write access.
Time to create page: 0.064 seconds