Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: ESDR3 Options Menu

ESDR3 Options Menu 31 Dec 2021 00:26 #1

  • K0PJ
  • K0PJ's Avatar
  • OFFLINE
  • Posts: 45
  • Thank you received: 5
Just curious if there is an equivalent 'options' tab on ESDR3 as ESDR2 has? I'm trying to figure out how to adjust the panadaptor refresh rate. Full speed is waaaay to fast for me from a psychological standpoint ;-). .

Also, looking for the button to key my amp. The PA button does not seem to do anything. Nonetheless, I enjoy the receiver sound......made a few qrp contacts.

73,
Greg
Greg K0PJ/9
Master Brewer & DXer
The administrator has disabled public write access.

ESDR3 Options Menu 31 Dec 2021 01:39 #2

  • Tom W3FRG
  • Tom W3FRG's Avatar
  • OFFLINE
  • Posts: 95
  • Thank you received: 14
Greg,

Use the Break-In for using your cw key.
For the Panadapter Refreshrate and speed click on "Settings" upper right wheel. and then click on the second Icon from the bottom. See dwg.

Tom
Attachments:
The administrator has disabled public write access.

ESDR3 Options Menu 31 Dec 2021 03:00 #3

  • danielwee
  • danielwee's Avatar
  • OFFLINE
  • Posts: 209
  • Thank you received: 29
What the PA button does is to enable the keying of the external amplifier if you have the PTT from the accessory port wired correctly to the amplifier. If you do not enable the PA button, the PTT for the external amplifier will never key. If your amplifier does not key even with PA enabled, there may be some wiring issues between the accessory port and the amplifier. The button itself does not key anything, but it enables the keying of the amplifier when you assert PTT for the radio.
Last Edit: 31 Dec 2021 03:01 by danielwee.
The administrator has disabled public write access.

ESDR3 Options Menu 31 Dec 2021 07:57 #4

  • sm4ive
  • sm4ive's Avatar
  • OFFLINE
  • CW is King VHF-SHF EME
  • Posts: 102
  • Thank you received: 15
Greg!
If the pa dosent ptt you have not activated the PTT its under BM button (located on top row) Band manager chose any of the PA Ptt 1>4 ceck for the bands you like to use the pa.
X8 are only for Ext ctrl
PA 1>4 are for RCA conn
Gl Lars SM4IVE
Last Edit: 31 Dec 2021 07:58 by sm4ive.
The administrator has disabled public write access.
Time to create page: 0.082 seconds