Welcome, Guest
Username: Password: Remember me

TOPIC: New SunSDR2DX can't start ExpertSDR2DX

New SunSDR2DX can't start ExpertSDR2DX 19 Jun 2020 18:44 #1

  • qst
  • qst's Avatar
  • OFFLINE
  • Posts: 5
Today I connected the new SunSDR2DX. After installing ExpertSDR v.1.3.1 update 6 and after configuring the network card, the program sees the radio and the green LED is constantly lit. When I turn on the program, the relay will switch on the radio for a few seconds but the program does not open and there is no reception. I have Win10 64 bit. I also installed the 32 bit version and the same. I don't know if this is a hardware or software problem. They can't close ExpertSDR2 because it hangs after a failed start Maybe you need to install the old version of the program first? I don't know what to do or how to diagnose a problem.
Maybe some of you had such a case?
Slav.
The administrator has disabled public write access.

New SunSDR2DX can't start ExpertSDR2DX 20 Jun 2020 13:17 #2

  • qst
  • qst's Avatar
  • OFFLINE
  • Posts: 5
Problem solved. :so_happy:
The administrator has disabled public write access.

New SunSDR2DX can't start ExpertSDR2DX 18 Jul 2020 21:44 #3

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 609
  • Thank you received: 289
Help Same problem , Just received
I have connected to my laptop and set IP, confirmed see radio- it even did a Firmware then PA update
But when switching on relay clicks then clicks back off- nothing else is working.

please help
73 Rick
The administrator has disabled public write access.

New SunSDR2DX can't start ExpertSDR2DX 18 Jul 2020 22:43 #4

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 609
  • Thank you received: 289
Got it, had to do with a firmware
All working now-
73 Rick
The administrator has disabled public write access.
Time to create page: 0.077 seconds