Welcome, Guest
Username: Password: Remember me

TOPIC: SunSDR2 DX Output Power

SunSDR2 DX Output Power 25 Jan 2021 08:27 #1

  • mir
  • mir's Avatar
  • NOW ONLINE
  • Posts: 51
  • Thank you received: 7
Daer Rome
Tune slider to 100% I have the output power in the TXPower display in Eesdr2 for each band a different display:
1842 Khz - 81.2W
3650 - 88 W.
5327 - 85 W.
7100 - 90.5 W.
14200 - 93 W.
28200 - 93 W.
I can read the same output power values on my external power meter.
The measurements were made on a dummy load 50ohm (Drake).
In the power correction tab, all values are set to 100.
How can I adjust the output power so that I can reach the 100W output for every band. (+ -....% difference)
Thank you and 73 de Arturo
The administrator has disabled public write access.
The following user(s) said Thank You: DD5MD

SunSDR2 DX Output Power 25 Jan 2021 14:46 #2

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
Dear Arturo.
Let's have a remote session via Teamviewer 14 and Skype tomorrow at 8:00 UTC.
Please install Teamviewer 14 and Skype on your PC and add us in Skype, our login - expert_electronics, name - EE_Russia.
Let us know your Teamviewer login and password via Skype, 10 minutes before the session.
Prepare power-meter and dummy load.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

SunSDR2 DX Output Power 25 Jan 2021 15:08 #3

  • mir
  • mir's Avatar
  • NOW ONLINE
  • Posts: 51
  • Thank you received: 7
Dear Roma
On Tuesday, January 26th is not possible for me. It's good on January 28th same time. OK????
The administrator has disabled public write access.

SunSDR2 DX Output Power 26 Jan 2021 08:26 #4

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1052
  • Thank you received: 529
OK for Thursday.

P.S.
I don't read the forum regularly, thus please write directly to our company email about such cases.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: Stark

SunSDR2 DX Output Power 28 Jan 2021 12:34 #5

  • mir
  • mir's Avatar
  • NOW ONLINE
  • Posts: 51
  • Thank you received: 7
For everyone.
the low output power is due to the too low voltage of the power supply unit. See the instruction manual..
73 de Arturo
The administrator has disabled public write access.
The following user(s) said Thank You: Stark, SamWalker
Time to create page: 0.069 seconds