Great!
It work as expected now!! (sorry I can't find the one pint up emoticon)
73' Enzo

Sorry if it is not nice to ask it here in an Expert Electronics forum

Is it possible to get SDC Skimmer work with SDR software and hardware other than Expert SDR? I have a project now for which we have to use other makes of radios, so HDSDR or SDR Console could supply the IQ and CAT. Is CW Skimmer our only option or can SDC be made to work ?

There has to be input to SDC via TCI, either direct or via a UDP to TCI conversion as done by SDC itself or VSELink. The latter does not facilitate the IQ stream and therefore, in effect, the answer is no.

SDC is now at version 10.69 - www.dropbox.com/s/tfkaqf6615eo9kd/SDC_10_setup.zip?dl=0

This takes the 10.6525 Skimmer algorithm and enhances it further for CQ WW CQ Contest conditions.

Erik.

Is this version available for Mac?

Thanks.

Scott

Not yet. Last version available is 10.65 for the moment.

Erik.

Thanks Erik. Does SDC for Mac OS provide audio and com ports for apps such as WSJT-X?

Thank you,

Scott

Its functions for Mac are the same as for Windows. It does not have native COM nor audio. In Windows these are provided by apps such as Virtual Serial Port Emulator and VAC. How these apply to Mac I do not know. Somewhere on this Forum I believe there are messages from Mac users of SDC that might give an insight. One such thread is at eesdr.com/en/forum-en/third-party-software/7751-mac-and-sdc and I think you can email Rick VE3MM for more information.

Erik.

Hi,
I run SDC skimmer on the bands that my SunSDR2Pro is working on. On other bands I use CW Skimmer.
Today I wanted to set up sending spots to the Reverse Beacon Network. So I downloaded Aggregator, the software that can upload spots to RBN from the local skimmer. It works just fine with the CW Skimmer. However, spots from SDC are always dropped by Aggregator because it thinks the spots are No-CQ.

Please see screenshot. 14 MHz spots are from CW Skimmer and they are duly uploaded to Reverse Beacon Network (these spots are marked as +) , whereas he 7 MHz spots are labelled NCQ and marked with a minus sign, meaning they are not sent to RBN.

I wonder if you have succeeded in sending spots to RBN using SDC and what your settings might be.

Can someone please check with Yuri?

SDC is now at version 10.74: www.dropbox.com/s/tfkaqf6615eo9kd/SDC_10_setup.zip?dl=0

1. A new 'Night' style has been introduced and can be enabled on the Set Up tab.

2. A Focus Helper system for N1MM+ has been added. Change the frequency, click on the panorama, split buttons, filter, etc. in the ESDR2 window and the focus will automatically return to the N1MM window.






3. The Skimmer settings and the Skimmer Global settings now have windows rather than tabs:



There will be more information in a forthcoming UMA update to be published soon.

Erik.

SDC is now at version 11.001 www.dropbox.com/s/tfkaqf6615eo9kd/SDC_11_setup.zip?dl=0

The main version number corresponds to the number of subsystems.
In SDC v11 there is a new (11th) tab "Audio Scope".
It is designed to display the spectrum and / or oscillograms of low-frequency signals. A linear output can be used as a signal source from ExpertSDR2.
The audioscope can be displayed outside the SDC window, in a convenient location. Synchronization of work with TCI - the Audio Scope window will be activated if the specified client connects to the transceiver (receiver). Most of the parameters of the audioscope can be changed on the fly.






Erik.

SDC is now at version 11.03 www.dropbox.com/s/tfkaqf6615eo9kd/SDC_11_setup.zip?dl=0

1. Set Sample Rate is transferred to the skimmers.
2. Added Auto qualifier for Sample Rate:

Is there an updated Mac version?

Thanks,

Scott N1SER

Not yet.

SDC 11.02 - eesdr.com/en/expertsdr2-en/software-en