Welcome, Guest
Username: Password: Remember me

TOPIC: sdc

sdc 27 Jun 2019 11:26 #76

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
SDC is now at version 12.00 drive.google.com/open?id=1GC9oAxKCNxjYmxGMkJ6WE3ND2dCsSUMl

There is a new tab called SWR. With this function you can build graphs of antenna SWR at the displayed frequencies.

ESDR2 must be at version 1.3.0 Beta 3 or later. SDC must be attached via TCI. Use the Tune button in ESDR2 with an output power exceeding 3 watts.

In SDC select the band, the upper and lower limits of the sweep range frequencies, and the step size. Press start.

The result will be something like this:

2.jpg


Because I am still using 1.2 I have not tested it myself but a friend ran an analysis with a comparison to a sweep function SWR analyser unit. The results were quite close.

Erik.
The administrator has disabled public write access.
The following user(s) said Thank You: KV5J

sdc 28 Jun 2019 07:48 #77

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
Just to add a note: if you have 12.00 and are suffering from program crashes after using the SWR function, download SDC again on the same link. It is now 12.01 with the error corrected.
The administrator has disabled public write access.

sdc 01 Oct 2019 06:23 #78

  • iw7dmh
  • iw7dmh's Avatar
  • OFFLINE
  • Posts: 106
  • Thank you received: 49
Hello,
can you provide a link for SDC 12.X - Linux 64?

Best regards
Enzo, iw7dmh
The administrator has disabled public write access.

sdc 01 Oct 2019 07:02 #79

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
No Enzo, I cannot. So far as I know there has not yet been a 12.x version compiled for Linux. These compilations are made by EE so you could ask them in a direct email if one can be made for 12.04

Erik.
The administrator has disabled public write access.
The following user(s) said Thank You: iw7dmh

sdc 01 Oct 2019 07:13 #80

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 640
  • Thank you received: 257
To compile a new SDC version for Linux and Mac we need to get an SDC project from Yuri Pavlov and then compile it, could you please ask him.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: iw7dmh

sdc 01 Oct 2019 07:43 #81

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
Yes - email sent to him now.

Erik.

Update: Roman, I had an immediate response from Yuri as below -

Hello, Erik.

I have already appealed to the Expert Electronics. I hope they will take the time to build the program for Linux and MAC.

73 de Yuri.

Maybe you can liaise with him for Enzo and other Linux / Mac users if you have the time.

Erik
Last Edit: 01 Oct 2019 08:00 by g0cgl.
The administrator has disabled public write access.
The following user(s) said Thank You: Rome, iw7dmh

sdc 03 Oct 2019 11:59 #82

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 640
  • Thank you received: 257
New SDC versions for Linux and macOS are on the web-site eesdr.com/en/expertsdr2-en/software-en
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: G4KVT

sdc 04 Oct 2019 11:13 #83

  • iw7dmh
  • iw7dmh's Avatar
  • OFFLINE
  • Posts: 106
  • Thank you received: 49
Thank you very much.
Works perfectly on my ubuntu 18.04 LTS.
73' Enzo
The administrator has disabled public write access.

sdc 04 Oct 2019 12:22 #84

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
SDC is now at version 12.05 drive.google.com/open?id=1wSR0XAIyTmFao3AhSlSF5SbTh4UwP5Do

The most significant change is the addition of a RTTY Skimmer.

Erik.
The administrator has disabled public write access.

sdc 04 Oct 2019 21:19 #85

  • KV5J
  • KV5J's Avatar
  • OFFLINE
  • Posts: 31
  • Thank you received: 3
I see the drop down arrow but how do I set this up for RTTY?


Keith, KV5J
The administrator has disabled public write access.

sdc 05 Oct 2019 07:40 #86

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 731
  • Thank you received: 286
The administrator has disabled public write access.
The following user(s) said Thank You: LA9AKA, KV5J, G4KVT

sdc 08 Feb 2020 18:26 #87

can anyone tell me why the program is sticking around a bit.????
The administrator has disabled public write access.
Time to create page: 0.250 seconds