Welcome, Guest
Username: Password: Remember me

TOPIC: Scope Spectrum N1MM+

Scope Spectrum N1MM+ 06 Apr 2020 20:37 #1

Hi everyone.
I use SDC with ExpertSDR2 and N1MM +.
Is there a way to run N1MM + Scope Spectrum at the same time.

Thank you

73 de Dani EA5M
The administrator has disabled public write access.

Scope Spectrum N1MM+ 07 Apr 2020 07:10 #2

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
Section 5.11 of the UMA to use with ESDR2/SDC and section 6.14 of the UMA to use only with ESDR2. The N1MM+ Scope Spectrum usage is also described within the N1MM help files.
The administrator has disabled public write access.

Scope Spectrum N1MM+ 09 Apr 2020 16:37 #3

Hi Erik.
Thanks for the info.
I have followed the steps of the documentation.
I can't see the spectrum via UDP.
I have configured the following by SDC:

13064.png


And by N1MM:

2020-04-09.png


Start ExpertSDR2, then SDC and finally N1MM. When I open N1MM's Spectrum Display Window, it freezes within seconds.

What am I doing wrong ??
The administrator has disabled public write access.

Scope Spectrum N1MM+ 10 Apr 2020 09:55 #4

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
Hello Dani,

Yes, you are correct, there is a problem. This also happens with VSELink which suggests it is something to do with N1MM. I am in the process of trying to get help to find out what is wrong - I have no idea myself at the moment. I will update you here if/when I find out something.

Erik.
The administrator has disabled public write access.
The following user(s) said Thank You: S58WW, Rome

Scope Spectrum N1MM+ 10 Apr 2020 14:43 #5

Thanks Erik.
I wait

73 de Dani EA5M
The administrator has disabled public write access.

Scope Spectrum N1MM+ 10 Apr 2020 15:55 #6

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
Hello Dani,

The reason has been found and VSELink now works with the N1MM Spectrum Scope. For VSELink users, it is necessary to download the latest version 0.70b

So, I have just this minute written to Yuri, the SDC author, who as yet does not know of the problem at all. Usually he is very helpful so I hope he will respond with a fix soon. As always, following any developments I will pass the information on here.

Erik.

PS: For VSElink users I will need to update the UMA. It is necessary to edit the xml file (using Windows Notepad). The relevant parameters to change are:
<SpectrumDisplayEnabled>true</SpectrumDisplayEnabled>
<SpectrumFrequency>10</SpectrumFrequency> .................this ensures the panoramic display is not slow
Last Edit: 10 Apr 2020 15:56 by g0cgl.
The administrator has disabled public write access.

Scope Spectrum N1MM+ 11 Apr 2020 10:19 #7

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
SDC now works with the N1MM+ Spectrum Scope. It is necessary to download and install the latest version of SDC - 12.18b40 which is at

www.dropbox.com/s/e08iorriniwt5o5/SDC_12_setup.zip?dl=0

The UMA has been updated with additional information for both the SDC and VSELink implementations of interfacing ESDR2 with the N1MM Scope. See pages 32 and 33 for SDC and pages 58 and 59 for VSELink.

www.dropbox.com/s/lhvwwuyuxpoq7gs/Expert%20Electronics%20Addendum.pdf?dl=0

Phil M0VSE provided the solution and I am grateful for his assistance.

Erik.
Last Edit: 11 Apr 2020 10:20 by g0cgl.
The administrator has disabled public write access.

Scope Spectrum N1MM+ 11 Apr 2020 12:14 #8

Hi Erik.
Is there a 32-bit version?

73 de Dani EA5M
The administrator has disabled public write access.

Scope Spectrum N1MM+ 11 Apr 2020 12:25 #9

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
Ah, damn it - I did not think of that. Sorry. There is not at this moment but I will liaise with Yuri. It might have to wait until the next official release but that should be soon I believe.

Erik.
The administrator has disabled public write access.

Scope Spectrum N1MM+ 11 Apr 2020 12:30 #10

OK Erik.
No problem,
Thank you very much for the management.

73 de Dani EA5M
The administrator has disabled public write access.

Scope Spectrum N1MM+ 20 Apr 2020 15:21 #11

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
The administrator has disabled public write access.

Scope Spectrum N1MM+ 20 Apr 2020 19:45 #12

Hello everyone, the Spectrum Display now works OK.

It only remains to solve the RIT and, now I have realized that the Split does not work well in S&P and neither in RUN. It is as if VFO B is not there. It is only when using the up or down arrows on the PC keyboard. With the E-Coder some things work. I think these options need revision. But I don't know to whom the reviews correspond, (N1MM + or ExpertSDR2).

73 de Dani EA5M
The administrator has disabled public write access.

Scope Spectrum N1MM+ 20 Aug 2020 13:33 #13

  • N8SDR
  • N8SDR's Avatar
  • OFFLINE
  • Posts: 90
  • Thank you received: 40
Eric, I know this is an older topic,

But could you tell me what the most current version of SDC is, is it still the 12.21b or has there been an update, looking for an x64 current version

The link listed in the 3rd party software- doesn't really take you anywhere relevant to get current version

thank you

Rick
73 Rick
Last Edit: 20 Aug 2020 13:33 by N8SDR.
The administrator has disabled public write access.

Scope Spectrum N1MM+ 20 Aug 2020 18:34 #14

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1015
  • Thank you received: 406
Latest SDC is 12.21b11. The latest verified working and free of malware version is always at www.dropbox.com/s/e08iorriniwt5o5/SDC_12_setup.zip?dl=0
The administrator has disabled public write access.
The following user(s) said Thank You: N8SDR
Time to create page: 0.156 seconds