Welcome, Guest
Username: Password: Remember me

TOPIC: 599 function in SDC v12.2505 under ColibriNano

599 function in SDC v12.2505 under ColibriNano 01 Nov 2020 17:40 #1

  • ic8pof
  • ic8pof's Avatar
  • OFFLINE
  • Posts: 27
  • Thank you received: 1
HI is there a secret way to operate such function? I am not jet able to get it working.
599 to panorama is ON , SPLIT is ON, ACTISPOT is ON but not visible (where is it?),
CW decoder for vfo-a et vfo-b are ok.
PILEUP mode tried either ON&OFF with no luck.
What more...
73
Phil
The administrator has disabled public write access.

599 function in SDC v12.2505 under ColibriNano 01 Nov 2020 19:58 #2

  • g0cgl
  • g0cgl's Avatar
  • NOW ONLINE
  • Erik EI4KF / G0CGL
  • Posts: 997
  • Thank you received: 395
No, there is no secret way.

Is the ColibriNano being driven by TCI (and not only by synching with another radio)?

Are Spots working normally from SDC to the Panorama?

Have you defined the markers?

Regarding ActiSpot: it is not active until either a) a compatible log is connected or b) the telnet server is started manually. Is at least one of these criteria true?
The administrator has disabled public write access.
The following user(s) said Thank You: ic8pof

599 function in SDC v12.2505 under ColibriNano 02 Nov 2020 17:36 #3

  • ic8pof
  • ic8pof's Avatar
  • OFFLINE
  • Posts: 27
  • Thank you received: 1
GE Erik,
>>Is the ColibriNano being driven by TCI : YES
>>Are Spots working normally from SDC to the Panorama? : YES
>> Have you defined the markers? : YES
>> ACTISPOT : NO LUCK , bandmaps are ok
I have tried to start the telnet servers manually still no luck.
.... will try further "clicks"...
73
Phil
The administrator has disabled public write access.

599 function in SDC v12.2505 under ColibriNano 04 Nov 2020 06:13 #4

  • UT4LW
  • UT4LW's Avatar
  • OFFLINE
  • Posts: 78
  • Thank you received: 21
Function 599 will automatically start when Split is on. The ColibriNano receiver does not have Split mode. ColibriNano synchronizes with the transceiver via RIG Sync. If Split is on on this transceiver, the 599 function will start working.
Юрий.
The administrator has disabled public write access.
The following user(s) said Thank You: S58WW, iw7dmh

599 function in SDC v12.2505 under ColibriNano 04 Nov 2020 11:51 #5

  • iw7dmh
  • iw7dmh's Avatar
  • OFFLINE
  • Posts: 180
  • Thank you received: 86
Hello Yuri,

thank you very much for the clarification.
While we are here, I am wondering if you can consider an additional SDC feature for showing the 599 signs in EESDR panadapter end a "599" text (or any other) in the SDC-Skimmer window, also when no split function is enabled.
I hope you can agree.

Best 73'
Enzo, iw7dmh
The administrator has disabled public write access.

599 function in SDC v12.2505 under ColibriNano 09 Nov 2020 14:28 #6

  • UT4LW
  • UT4LW's Avatar
  • OFFLINE
  • Posts: 78
  • Thank you received: 21
Ok, Enzo, in the next version I will add this setting to the program.
Юрий.
The administrator has disabled public write access.
The following user(s) said Thank You: iw7dmh

599 function in SDC v12.2505 under ColibriNano - solved 10 Nov 2020 18:01 #7

  • ic8pof
  • ic8pof's Avatar
  • OFFLINE
  • Posts: 27
  • Thank you received: 1
HI Yuri et All.
I think I have solved the 599-to-panorama.
Thanks to Yuri advice to turn ON the RIGSYNC tab in the SDC setup fields and after some more time spent in thinking HOWTO click-around
I have succeded to get it working with my combo: FT1000Field+COLIBRI_Nano ... ah of course the PC itself.
See the attached screen-crop.
Four main steps are needed:
1) activate RIGSYNC in the SDC SETUP,
2) activate one SYNC_CHANNEL and RIG_CONTROL1 with TCI CLIENT and name it COLIBRI (just in case one forgets...),
3) tick OMNIRIG CONTROL on the right, I hope you are using that interface to the CAT.
4) tick SEND-RST-599 to panorama in the GLOBAL SKIMMER SETUp,
and last activate the SPLIT on the TRX.
What happens : by clicking the 599-to-panorama it lets appear the square-brackets showing the PILE-UP limits and activating
the SPLIT button on the TRX activates the secondary VFO bar in the Colibri and it gets chained to the TRX_VFO_B.
Of course in the EESDR soft the VFO_B audio-mixer level must be set to any comfortable value to let hear the stations in the splitted part
and in the SETUP_SKIMMER UN_tick DECODE VFO_A and tick SEPARATE-WINDOWS-VFO A+B .

I hope this short notice will be of help to anyother who comes for the first time in such "complicated" :music: situation.

One last notice: after having replicated some times to be sure that such procedure works, now the SPILT function opens with a light-red shadow
on the right side ( ONLY IN 160MT,see on the left under ON4AWX call) and do not know how to get it away. Sure Yuri will know that. ;)
73
Phil
Attachments:
Last Edit: 10 Nov 2020 18:02 by ic8pof.
The administrator has disabled public write access.
Time to create page: 0.137 seconds