Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Using N1MM logger Spectrum Display

Using N1MM logger Spectrum Display 03 Nov 2017 17:02 #1

  • G3XLG
  • G3XLG's Avatar
  • OFFLINE
  • Posts: 88
  • Thank you received: 16
The N1MM+ contest logging program now has a Spectrum display.
It connects to all the Flex 6000 series transceivers, most Icoms, most Yaesu, Electrafts, SDR Play etc. As well as the frequency spectrum it also decodes the call sign on the display.

Does anyone know how to connect it to the MB1 or the SDR2Pro?
see here:-
n1mm.hamdocs.com/tiki-index.php?page=Spectrum+Display+Window

73 Ray G3XLG
The administrator has disabled public write access.

Using N1MM logger Spectrum Display 04 Nov 2017 12:25 #2

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 736
  • Thank you received: 287
It needs identifying information and spectrum feed from the source which as yet is not supplied by ESDR2. I would recommend emailing a feature request to EE. I believe there may be a tie up coming with TCI in N1MM+ but I don't have the latest info on that.

Erik.
The administrator has disabled public write access.

Using N1MM logger Spectrum Display 24 Jun 2018 08:51 #3

  • G3XLG
  • G3XLG's Avatar
  • OFFLINE
  • Posts: 88
  • Thank you received: 16
Roman
Any news of the link between TCI & N1MM that Erik mentioned above? I think I also saw the proposed link somewhere else on this site?
73 Ray G3XLG
The administrator has disabled public write access.

Using N1MM logger Spectrum Display 25 Jun 2018 06:45 #4

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 645
  • Thank you received: 260
Hi, Ray.
We haven't worked on that since then, at the moment we are developing the TX capability for the ExpertRemote system.
After that, we'll get back to the main ExpertSDR2, probably starting with TCI.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Using N1MM logger Spectrum Display 08 Apr 2020 17:06 #5

There is an option in SDC software "Spectrum via UDP" that theoretically would allow N1MM to use data from ExpertSDR to build the spectrum but in reality it makes N1MM spectrum so so slow that makes it unusable. Perhaps there is much more work to do on the N1mm side.
The administrator has disabled public write access.

Using N1MM logger Spectrum Display 08 Apr 2020 18:44 #6

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 736
  • Thank you received: 287
It works perfectly for me and other users. Only proven features are written into the UMA. The only real difference is that the resolution is less than in ESDR2. That makes it less usuable but not unusable. Yuri did add the caveat that slower computers may not be able to cope and so there is a setting in the SDC Skimmer setup to help with retaining speed.

What does strike me though is we already have a spectrum in ESDR2 so why do we need to also see one in N1MM? Anyway it was requested it seems many users are happy to have it.
The administrator has disabled public write access.
Time to create page: 0.167 seconds