Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****
  • Page:
  • 1
  • 2

TOPIC: Software & Hardware Development & Wishes

Software & Hardware Development & Wishes 11 Jul 2018 14:51 #1

  • G3XLG
  • G3XLG's Avatar
  • OFFLINE
  • Posts: 156
  • Thank you received: 30
Earlier this year EE published a list of their proposed software developments over the next few months:-

Main Features release schedule*:
July 2018 - ExpertRemote system with TX capabilities
August 2018 -- ALC- Manual TNF
August/September 2018 - - Transverter mode
Late 2018 - Full Duplex
Early 2019 - - Predistortion
*Release schedule may be changed in time

I would like to know if this timetable is still in operation or needs to be updated in any way

My own wish list also includes some of the things on the above EE list plus 2 additional wishes.
1. I would like to see QSK operation for CW using Pin Diode switching in the MB1. (I note that Roman mentioned an outboard Pin Diode module for the SunSDR2PRO already being developed, so hopefully this will also work with the MB1 ?)
2. As a contester, I would like a digital voice recorder to enable auto sending of CQ's & reports etc on SSB. I can already use an external CW message recorder for CW, but it would be nice if a CW message recorder was built in too.
73 Ray G3XLG
The administrator has disabled public write access.

Software & Hardware Development & Wishes 27 Nov 2019 14:34 #2

Hi my wish would be to have the memory tag to have a full mem IE to save CTCSS,RPTR, Volume settings,and ATU thanks tony swan M0EUY
The administrator has disabled public write access.

Software & Hardware Development & Wishes 03 Jan 2020 09:49 #3

  • OZ8PM
  • OZ8PM's Avatar
  • OFFLINE
  • Posts: 22
  • Thank you received: 1
Hi Ray
If you already know this then please disregard this post - but, regarding your wish 2) IW7DMH has developed TCI Macro and I think it's what you're looking for -> iw7dmh.jimdofree.com/sunsdr2-pro-pages/tci-macro/

Haven't tried it myself but perhaps it will suit your needs?

Vy 73 Peter OZ8PM :hi:
The administrator has disabled public write access.

Software & Hardware Development & Wishes 03 Jan 2020 10:33 #4

  • G3XLG
  • G3XLG's Avatar
  • OFFLINE
  • Posts: 156
  • Thank you received: 30
Hi Peter
Thanks for your reply bringing that software to my attention. I knew IW7DMH had done it for CW macros but was not aware that it covered SSB wav.files too.
He recently wrote an articlle concerning linking LogHX to the SDC program which was very good & I understand he now intends to write an article concerning using the 5M Contest log with SDC.. I note that the DVK wav.file macros he is using are in 5M Contest log.
73
Ray G3XLG
Last Edit: 03 Jan 2020 10:33 by G3XLG. Reason: typo
The administrator has disabled public write access.

Software & Hardware Development & Wishes 03 Jan 2020 10:43 #5

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
Don't forget the K9DUR DVK shown in the UMA. It provides additional control compared to 'TCI Macro'.
The administrator has disabled public write access.

Software & Hardware Development & Wishes 15 Nov 2020 10:15 #6

  • VK6NX
  • VK6NX's Avatar
  • OFFLINE
  • Posts: 338
  • Thank you received: 161
Not sure if this would be correct topic, but I could not find any other for TCI protocol library wishes (EE please move this is I am blind and TCI dev wishes exists).

Couple wishes for EE dev team:

1. Would you mind to add DRIVE and TUNE_DRIVE to TCI/projects_example/TciClient/ in GitHub? In current TCI version both commands are callable via WebSockets, but not embedded into Qt library published on Git,
2. Could you, please, add to next TCI version the command to On/Off PA? I believe I have asked about that earlier, however it seems the request been lost. I need this function enable/disab;e PA during ATU tuning process (which is controlled via TCI in my application).

Thanks
VK6NX
The administrator has disabled public write access.

Software & Hardware Development & Wishes 16 Nov 2020 12:14 #7

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
Hi, we have several requests regarding the expansion of the command list in TCI, I've added the commands you've asked for to the list.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Software & Hardware Development & Wishes 16 Nov 2020 12:28 #8

  • sq3rx
  • sq3rx's Avatar
  • OFFLINE
  • Posts: 18
I would like to add possibility to change mixer settings via TCI
I'm mostly interested in RX1 & RX2 audio balance eg. RX1 left channel and RX2 right. This would be useful for SO2R integration.
The administrator has disabled public write access.

Software & Hardware Development & Wishes 16 Nov 2020 12:53 #9

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
it's already on the list.
To make sure your suggestions are heard I suggest to send them directly to our email, I monitor Forum from time to time and might miss certain suggestions.
Роман, Roman
Expert Electronics
The administrator has disabled public write access.
The following user(s) said Thank You: iw7dmh

Software & Hardware Development & Wishes 16 Nov 2020 17:21 #10

  • G4SJP
  • G4SJP's Avatar
  • OFFLINE
  • Posts: 37
  • Thank you received: 4
I'm looking forward to the inclusion of the 4m band, as promised some time ago.
The administrator has disabled public write access.

Software & Hardware Development & Wishes 16 Nov 2020 19:49 #11

  • iw7dmh
  • iw7dmh's Avatar
  • OFFLINE
  • Posts: 250
  • Thank you received: 116
Hello Roman,

I hope you'll add TCI additional command for the "live cw". It is one of the most "asked" question for my humble TCI-Macro program.

Best 73'
Enzo
The administrator has disabled public write access.

Software & Hardware Development & Wishes 17 Nov 2020 06:20 #12

  • Rome
  • Rome's Avatar
  • OFFLINE
  • Quod Licet Jovi Non Licet Bovi
  • Posts: 1053
  • Thank you received: 529
Hi, Enzo.
Please clarify what is the "live cw" and what exactly you need us to add in TCI?
Роман, Roman
Expert Electronics
The administrator has disabled public write access.

Software & Hardware Development & Wishes 15 Mar 2021 15:56 #13

  • N9VX
  • N9VX's Avatar
  • OFFLINE
  • Posts: 6
For the past 10 years I have been using a SDR from Flex and now Apache Labs, and have just now got a SunSDR2 Pro and enjoying it very much. I have a request for the upcoming ExpertSDR3 software, I need a Check Box to reverse the mouse scrolling wheel. I use a track ball that has the scrolling wheel around the track ball, when you turn the wheel clockwise the frequency goes down (so it tunes backward). The software that runs on the Anan and KE9NS (old Flex radio) has this feature.

Running V1.3.1 update 8, x64 Windows 10

Thanks and 73,

Joe N9VX
The administrator has disabled public write access.

Software & Hardware Development & Wishes 17 Mar 2021 00:33 #14

  • kc2rgw
  • kc2rgw's Avatar
  • OFFLINE
  • Posts: 99
  • Thank you received: 33
Having recently purchased a Kensington Expert Mouse, the Kensington software allows reversing the scroll. I reversed it to tune Thetis with it and have not yet tried ExpertSDR2 with it since but it works fine with Thetis now. Whether it goes Up or Down is relative to how you use the wheel...on which side. I’m right handed and tend to use the right side of the wheel, ,thus why I flipped it.
The administrator has disabled public write access.

Software & Hardware Development & Wishes 17 Mar 2021 07:18 #15

  • g0cgl
  • g0cgl's Avatar
  • OFFLINE
  • Erik EI4KF / G0CGL
  • Posts: 1192
  • Thank you received: 474
Hi Roman, did you get an answer? Enzo refers to is CW sending freestyle, not via macro. In real time, as a keyboard key is pressed, the CW character is sent.
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.105 seconds