Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Wishes after a year of ownership

Wishes after a year of ownership 01 Mar 2019 10:46 #1

  • ramdor
  • ramdor's Avatar
  • OFFLINE
  • Posts: 52
  • Thank you received: 31
Ok, I have had my SunSDR2 Pro just over a year now. I wrote one of these a week or so after purchase about a year ago. I have mentioned some of these before, but here is an update :

  1. Add/change the minor revision number or add a letter to enable us to see a change in firmware included with ExpertSDR2. So either 1.2.0 becomes 1.2.1, or 1.2.0a ... 1.2.0b etc
  2. Transverter + MNF (these are coming, in 1.3.0... yay !)
  3. [Mute] button on RX1 + RX2 to leave sound running over VAC (or an option to do so). Sometimes I want to listen to people chatting on RX2, and work a digital mode on RX1. I have a work around for this, but it is not elegant
  4. Memories to include ctcss tones
  5. Processing/detection of the ctcss tone to be faster/more reliable
  6. Resizeable S-meter, and scale the power appropriately for the sunsdr2 pro, max 30w not 200w as it is currently
  7. User pre-defined filter sizes to be stored in a drop down
  8. More elegant mem panel, at a minimum to include grouping
  9. When step size is large, say 12.5KHz, and the sample rate is low such as 39062.5, the tuning hits a hard edge when the mouse wheel is used in the FFT area. It would be nice for the system to follow the tuned position

73
Richie.
Last Edit: 01 Mar 2019 10:56 by ramdor.
The administrator has disabled public write access.
The following user(s) said Thank You: LA9AKA
Time to create page: 0.112 seconds