Tuner AAT-100
Автоматическое согласование антенны.
01 / 03 — Вид спереди
Антенный тюнер для диапазона 1,8–30 МГц и мощности до 120 Вт. Вход 50 Ом; управляющий и антенный кабели длиной по 3 м.
- Max. power
- ~120W
- Impedance
- 50Ohm
- Cable
- 3m
- Frequency
- 1.8–30MHz
Capabilities
Automatic Antenna Tuner AAT-100 was designed for SunSDR2DX transceivers. Allowed SWR level is up to 3.5 (resistance level in a range from 15 up to 300 Ohm).
Start tuning with the Tune button in ExpertSDR2. Tuning power: minimum 5 W, recommended 15 W, maximum 20 W. Tuner states are saved in 50 kHz steps; tuning stops at SWR 1.0–1.2.
Operating conditions
Antenna and power
- Use with full-sized antennas at SWR up to 1:5.
- Use short antennas with SWR above 1:5 with caution and keep output power at or below 30 W.
Compatibility and warranty
- Transceivers EED06421900001…EED06421900100 and EED06511900101…EED06511900200 may require a voltage-stability hardware upgrade.
- Tuning capacitors, inductors, relays and the SWR sensor are not covered by warranty.
SpecificationsTuner AAT-100
Specifications
| Control cable length | 3 m |
|---|---|
| Input impedance | 50 Ohm |
| Length of antenna cable | 3 m |
| Maximum input power | ~120 W |
| Operating frequency range | 1.8–30 MHz |
| Operating temperature range | 0...+55 °С |
