Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
In this category, you can discuss different ways of connection between EE radios and external Power Amplifiers.

ТЕМА: SunDR2 Pro -- a few more watts to drive PAs

SunDR2 Pro -- a few more watts to drive PAs 06 Март 2021 21:07 #1

  • ea3in
  • ea3in аватар
  • Вне сайта
  • Сообщений: 1
Hello

I am very happ with my SunSDR2PRO, but I woyukld like to get something to go up to 30-40 Watts, in order to drive my linear amps (KPA500 and ACOM2000)
Any idea or suggestion?

Probably the answer is to move to a Sunsdr DX, but I would like to explore how to keep the SunSDRPRO2

73 de Marcel
Администратор запретил публиковать записи гостям.

SunDR2 Pro -- a few more watts to drive PAs 06 Март 2021 21:14 #2

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 171
  • Спасибо получено: 140
You could mode the KPA 500 for lower drive i suppose?
or use a small SS amp to drive to other amps-

perhaps it would be lees expensive in long run to use a low drive SS amp something like Russian EB104 series 500 watt or 1.2KW ( he will modify them to take lower drive to produce rated output)
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

SunDR2 Pro -- a few more watts to drive PAs 09 Март 2021 02:33 #3

  • VK6NX
  • VK6NX аватар
  • Вне сайта
  • Сообщений: 205
  • Спасибо получено: 163
Home brew EB104 - 5W IN enough to get 600W-1KW OUT.
5-10-16dB "in ATT" is needed while using 20-40-70W IN.
Администратор запретил публиковать записи гостям.

SunDR2 Pro -- a few more watts to drive PAs 20 Окт 2021 19:30 #4

  • k5rhd
  • k5rhd аватар
  • Вне сайта
  • Сообщений: 1
Build your own! I am thinking of getting one of these: www.hobbypcb.com/index.php/products/hf-radio/hardrock-500-power-amplifier-support-package

Spendy, but I will get to learn about how solid state amps work. I am going to get the ATU as well if I do it at all.

73
K5RHD
/randy
73
K5RHD
/randy
Arvada, CO USA
DM79
Администратор запретил публиковать записи гостям.

SunDR2 Pro -- a few more watts to drive PAs 20 Окт 2021 19:49 #5

  • DL3NCI
  • DL3NCI аватар
  • Вне сайта
  • DL3NCI
  • Сообщений: 3
Hi,
check out a JUMA 1000 PA. I had one, sold it and have ordered another one. It is small, light weight and well built.
www.jumaradio.com/juma-pa1000/
BTW: I get NO provision
I have a Expert 1k5 and use a SunSDR2DX, the JUMA was controlled by my sunsdr qrp, 5w are sufficient.
73
Marcus DL3NCI
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.109 секунд