Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: SSDR3 Alpha direct TCI connection to JTDX

SSDR3 Alpha direct TCI connection to JTDX 08 Май 2021 07:24 #1

  • M0CVX
  • M0CVX аватар
  • Сейчас на сайте
  • Сообщений: 39
  • Спасибо получено: 5
Has anyone managed to connect the latest JTDX via TCI to the SSDR3 Alpha software...if so, how did you do it? (Mine works brilliantly on SSDR2)
I can see a log file on the TCI window of SSDR3...but can't get JTDX to find or open a connection.
I really want to play with SSDR3 but without this it is pretty useless for me..

Any ideas?

Paul M0CVX
Администратор запретил публиковать записи гостям.

SSDR3 Alpha direct TCI connection to JTDX 12 Май 2021 11:56 #2

  • Gm8giq
  • Gm8giq аватар
  • Вне сайта
  • Сообщений: 5
Same issue here, EXP3 now running after issues with Windows firewall allowing app but TCI not.
On an aside or maybe opposite question will EXP3 still allow VAC and virtual comm ports if desired and anybody know how to set this up.

tnx,
chuck...
Администратор запретил публиковать записи гостям.

SSDR3 Alpha direct TCI connection to JTDX 12 Май 2021 12:06 #3

  • M0CVX
  • M0CVX аватар
  • Сейчас на сайте
  • Сообщений: 39
  • Спасибо получено: 5
Hi Chuck. I saw it confirmed in another thread on this forum that there is a TCI bug in the Version 3 Alpha.
I also hope that Vers 3 will ultimately allow either 2 TCI servers..or TCI and VAC...I have got accustomed to running two decoders..one for RX1 and one for RX2.

Regards Paul M0CVX
Администратор запретил публиковать записи гостям.

SSDR3 Alpha direct TCI connection to JTDX 12 Май 2021 18:46 #4

  • LA3QMA
  • LA3QMA аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 24
I'm not able to TX in v3 only use the Tune button

But i tested several TCI commands and very few is accepted. Have bot been able to connect third party TCI programs as they get the wrong response from the radio.

Using a websocket debugger i can send/receive to the radio and it's working ok.
protocol:ExpertSDR3,1.5;
device:SunSDR2DX;
receive_only:false;
trx_count:2;
channels_count:2;
vfo_limits:0.0,160000000.0;
if_limits:-156250,156250;
modulations_list:AM,LSB,USB,CW,NFM,WSPR,FT8,FT4,JT65,JT9,RTTY,BPSK,DIGL,DIGU,WFM,DRM;
iq_samplerate:48000;
audio_samplerate:48000;
volume:-25;
mute:false;
mon_volume:0;
mon_enable:false;
dds:0,14100000;
dds:1,1950000;
if:0,0,56650;
if:0,1,0;
if:1,0,0;
if:1,1,0;
vfo:0,0,14156650;
vfo:0,1,14100000;
vfo:1,0,1950000;
vfo:1,1,1950000;
modulation:0,0,CW;
modulation:1,0,AM;
agc_mode:0,normal;
agc_gain:0,100;
agc_mode:1,normal;
agc_gain:1,80;
rx_enable:1,false;
tx_enable:0,true;
tx_enable:1,true;
lock:0,false;
lock:1,false;
rx_channel_enable:0,1,false;
rit_enable:0,false;
xit_enable:0,false;
split_enable:0,false;
rit_offset:0,0;
xit_offset:0,0;
sql_enable:0,false;
sql_level:0,-80;
rx_mute:0,false;
rx_volume:0,0,0.0;
rx_balance:0,0,0.0;
rx_volume:0,1,0.0;
rx_balance:0,1,0.0;
rx_channel_enable:1,1,false;
rit_enable:1,false;
xit_enable:1,false;
split_enable:1,false;
rit_offset:1,0;
xit_offset:1,0;
sql_enable:1,false;
sql_level:1,-80;
rx_mute:1,false;
rx_volume:1,0,0.0;
rx_balance:1,0,0.0;
rx_volume:1,1,0.0;
rx_balance:1,1,0.0;
drive:0,12;
tune_drive:0,10;
drive:1,50;
tune_drive:1,50;
trx:0,false;
tune:0,false;
trx:1,false;
tune:1,false;
stop;
ready;
Администратор запретил публиковать записи гостям.

SSDR3 Alpha direct TCI connection to JTDX 19 Май 2021 07:26 #5

  • es1js
  • es1js аватар
  • Вне сайта
  • Сообщений: 2
  • Спасибо получено: 11
When memory leak is more or less fixed in esdr3 then I will release JTDX 157-RC1 with esdr3 support. I use currently only esdr3, there all tci Audio problems seen with esdr2 are gone,
No more Lost Audio 1, no disturbed tx.
Only problem is long or longer term running.
There also some little problems with cat side, but this not essential.
Regards,
Arvo ES1JA
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome, G6PAP, M0CVX, UA4FX
Время создания страницы: 0.416 секунд