Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: 5M Contest

5M Contest 28 Авг 2022 15:27 #1

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 63
I am trying to run this with EESDR3 and get it going in RTTY. The HELP files are in Russian. I dont suppose anybody has an English translation. EESDR3 <>SDC<>5Contest :impossible: :impossible:
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 15:41 #2

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
Only English translation and it is pretty vague that I know of- 5mcontest.qrz.ru/5MContest_Help_ENG.exe

also there is a user group: groups.google.com/g/5mcontest
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Последнее редактирование: 28 Авг 2022 15:45 от N8SDR.
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 16:20 #3

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
N8SDR пишет:
Only English translation and it is pretty vague that I know of- 5mcontest.qrz.ru/5MContest_Help_ENG.exe

also there is a user group: groups.google.com/g/5mcontest


The file that downloads is an EXE file so you may need to tell windows to KEEP as it will mostly likely try and block it

The EXE file once clicked on will install an English help file within the 5M contest program

Screenshot2022-08-28120805.jpg
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 17:06 #4

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 63
Thanks for that Rick, it doesnt move me much further forward I'm afraid. Using SDC/TCI i can receive and decode the RTTY signals. If I run N1MM by using VAC etc I can TX also, but I cannot get the rtty to decode anything in 5M Contest, nor transmit anything. I have tried to google translate the russian help file sentence by sentence but that is very slow and hasnt helped up till now as I dont know what I'm translating, till after I have translated it, if that makes sense. I'll just keep plugging away... I got it working fine in CW earlier, but just nothing on RTTY.....
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 17:45 #5

  • VE3EY
  • VE3EY аватар
  • Вне сайта
  • Сообщений: 31
  • Спасибо получено: 7
Hi Tom
Did you by any chance forget to set the decoding to RTTY45 in SDC? EESDR3 should work fine with 5m contest.
Вложения:
Последнее редактирование: 28 Авг 2022 17:47 от VE3EY.
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 18:55 #6

  • VE3EY
  • VE3EY аватар
  • Вне сайта
  • Сообщений: 31
  • Спасибо получено: 7
VE3EY пишет:
Hi Tom
Did you by any chance forget to set the decoding to RTTY45 in SDC? EESDR3 should work fine with 5m contest.

EDIT. I meant to say. 5m works OK. I just tried it. Activate the DIGI tab in SDC and launch "DIGI" window in 5m. Offset is 1600 with DIGU mode.

Email me directly and I will try to help.
Администратор запретил публиковать записи гостям.

5M Contest 28 Авг 2022 20:24 #7

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 63
nO, that is about the only bit working. It works very well btw.
Администратор запретил публиковать записи гостям.

5M Contest 01 Сен 2022 18:03 #8

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 63
Today after much trial and error I got 5M Contest running with SDC and my SunSDR2 DX. It seems to run OK but havent yet found a rtty signal to test it out. I may send a few hours in the Russian WW RTTY Contest this weekend.

In trying to get the software to run, MY MISTAKE was to try to use the same PORT number between EESDR3<>SDC/TCI<>5M Contest. Today I used a different PORT between SDC and 5M and now it is transmitting nicely, but I still have not heard an incoming RTTY signal to check out receive. I have set up and tested my MACROS. So now I am happy and cant wait to try it out for real. :so_happy: :so_happy: :so_happy:
Tom - GM4FDM
Администратор запретил публиковать записи гостям.

5M Contest 24 Сен 2022 22:51 #9

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 63
Slight problem today in cqww rtty. I was operating on 40m when suddenly my screen flashed and the log showed i had lost over 200 contacts....Disappeard, a lot of S&P mults...... After some head scratching and a look at the gelp file i saw that each qso is stored immediatelybin a backup tect file and the cabrillo file. I took a chance and imported a copy of the xabrillo file which had all my missing Qs, but now my log has duplicate contacts and showsi have made twicevthe qsosvi have. The dxcc total seems ok as doesvthe zones and states, so i am hoping i can fix the cabrillo after the contest before submission. Any idea what might have caused my computer fart?
Администратор запретил публиковать записи гостям.

5M Contest 20 Нояб 2022 08:22 #10

  • mir
  • mir аватар
  • Вне сайта
  • Сообщений: 54
  • Спасибо получено: 7
dear om someone has an idea why 5mcontest can be started but then it won't finish and stay where????
I would like to add that it stays with "loading configuration form".
thanks!
73 de Arturo, HB9MIR
Последнее редактирование: 20 Нояб 2022 08:27 от mir.
Администратор запретил публиковать записи гостям.

5M Contest 25 Нояб 2022 15:37 #11

  • mir
  • mir аватар
  • Вне сайта
  • Сообщений: 54
  • Спасибо получено: 7
Fixed: Conflict with Omnirig. I then copied a working version from a fresh installation, after which everything works. Probably the problem was with an older installation of Omnirig. Bye Bye
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.086 секунд